G77 Fuel Pump Assembly (RXP255)
FPA-015 - Turbo Buick G77 Fuel Pump Assembly 1986 1/2-1987*
Fuel Pump Kit
The FPA-015 is recommended for factory HP upgrades to 600FWHP @ 43.5PSI using the factory lines and fuel pressure regulator. HP support may vary for N/A or F/I motors. Please factor in a 20-25% safety margin between what your motor needs and what your fuel system can supply. This fuel pump kit must be used with our FPWH-006 fuel pump upgrade harness. Many hangers require our BCWA-G77 due to the poor condition of the factory hanger's bulkhead wiring.
Please contact your local Racetronix dealer to discuss your fuel requirements.
* This kit was engineered for use with the factory Delphi G77-type hanger noted below. We cannot guarantee compatibility with aftermarket hangers.
Racetronix Fuel Pump Assembly
- Racetronix RXP255 255LPH turbine fuel pump with reduced noise and enhanced reliability with ethanol- enhanced fuels
- Filter sock - 30 micron filtering
wiring harness (no adapters)
- High pressure fuel line
- Stainless gear clamps
- Pump mount grommet
- Pump sound insulation sleeve
- OE-Style molded tank gasket
- Pump test lead
Parts currently in production may differ slightly from this image
two different fuel senders GM used during the production of the 1985-1987
Turbo Regals. Please read the info below on how to easily identify your
sender type before placing your order.
Order the G75 pump system if your sending unit has this connector with a black,
pink and tan wire. This connector is located on the driver's side behind the rear bumper.
Typically found on 1984, 1985 and some 1986 Turbo Buick's. The connector
color has no bearing on the sender type.
Order the G77 pump system if your sending unit has this connector with a black,
violet and gray wire. This connector is located
driver's side behind the rear bumper. Typically found on 1987 and some
1986 Turbo Buick's. The connector color has no bearing on the sender