Your shopping cart is empty.
To put something in your Shopping Cart, you must first browse or search for an item. When an item interests you, click the button labeled "Add to Cart", the item will be shown here.
Fuel Pump Wiring Kit MP150/280, Generic
FPWK-017A - Fuel Pump Wiring Kit MP150/GT280 *
This kit has all the parts required to upgrade the factory wiring on GM factory vehicles equipped with the older-style 4-position 150-series fuel module connector to the new-style GT-series connector system. The older-style 150-series connectors are known to fail over time so GM/Delphi has switched all new-production modules to incorporate the GT-series connector system which has twice the current capacity. This fuel pump wiring kit is a must when upgrading to new high-performance pumps which draw 2-3 times more power than a factory pump.
This fuel pump wiring kit contains the following items:
* The in-tank harness icluded with this kit is set up to work with first-generation Aeromotive Stealth pumps which have a white inlet on the bottom only. New-production Aeromotive Stealth pumps which have a red inlet require our FPWK-017W kit.
FOR USE WITH OUR FPA-001A fuel pump assembly (uses ITWH-022)
If you have an older FPA-001 fuel pump assembly or pump listed above you will requir our FPWK-017W which inludes our ITWH-023.
Always check the pump polarity markings on top of the pump. RED +, BLACK -
If the vehicle has had the factory module replaced then most likely the vehicle harness has had its 150-series connector replaced/spliced with a 280-series pigtail. This splice is included with most new modules. Our FPAH-004 is required to make the chassis connector backwards compatible with the 150-series input connector on our FPWH-017 upgrade harness.