Welcome to Racetronix
Welcome to Racetronix  |  All prices indicated are in USD($)  905-477-7014  |   Help   |  Catalogs  |  About Us

115 lb/hr Import Low-Z Fuel Injector

Item #: 01D133x

$58.30

per EACH
This is an obsolete Item
 
 
 In Stock & Ready to Ship

01D133x - 115 lb/hr Low-Impedance Import Fuel Injector


These are factory new injectors. We do not offer reconditioned / used injectors.

FEATURES:

  • Low-impedance coil works with peak / hold injector drivers.
  • Injectors sold in packs are dynamically flow-matched to within 1% tolerance.
  • Injectors sold as each are as per factory tolerance specified.
  • High-speed disc action allows wider dynamic flow range for improved idling and quieter operation
  • Design resists build up deposits which can affect fuel flow and cause clogging
  • No fuel leakage for quicker starts
  • Longer service life
  • O-ring lubricant supplied

SPECIFICATIONS:

  • Static flow: 111.1 lb/hr (840 grams/min)
  • Dynamic flow: 25.2 mg/pulse
  • Coil resistance: 2.2 Ohms
  • Spray pattern: Cone
  • Connector type: Minitimer (EV1-style)
  • Dynamic tollerance: +/-6%
  • Time offset: 0.7ms
  • Linear PW (min): 2.03ms
  • Opening / Closing time: 1.06 / 0.77ms
  • Peak / Hold current: 4 / 1 Amps
TECHNICAL INFORMATION

All tests run with n-Heptane @ 20°C (+/-1°C), 3.0 Bar (+/-0.01 Bar), 14VDC (+/-0.05VDC), saturated driver with resistive / capacitive or 70V zener cutoff. Dynamic rate @ 2.5ms @ 10ms period (100Hz)

Injector flow rates are based on testing with n-Heptane test solvent (0.6855 g/ml). U.S. EPA emission test gasoline 40CFR86.113 (0.735g/ml) flows in most common injector designs at about a 3 to 4% higher rate than n-Heptane. A ratio of 1.035:1 can be used when converting the flow specifications above.

* Advanced tuning data available in our support forum for confirmed Racetronix customers only.

Specifications