63 lb/hr Siemens High-Z Fuel Injector SB
Item #: FI114962
MPN : FI114962
$54.90
per EACH
In Stock & Ready to Ship
FI114962 - 63 lb/hr Siemens High-Z Fuel Injector SB
TYPICAL APPLICATIONS:
- High-performance aftermarket
Dynamically flowed and grouped to within 1% tolerance using Racetronix custom injector flow bench when purchased in packs.
All tests run with n-Heptane @ 20oC (+/-1oC), 3.0 Bar (+/-0.01 Bar), 14VDC (+/-0.05VDC), saturated driver with RC cutoff.
Injector flow rates are based on testing with n-Heptane test solvent (0.6855 g/ml). U.S. EPA emission test gasoline 40CFR86.113 (0.735g/ml) flows in most common injector designs at about a 3 to 4% higher rate than n-Heptane. A ratio of 1.035:1 can be used when converting the flow specifications above.
This high-impedance injector will work with all factory ECM/PCM injector drivers
ADDITIONAL INFORMATION
- Grease supplied to lubricate o-rings prior to installation
FLOW-MATCHED 1% INJECTORS ARE SOLD IN PACKS VIA THE 'BUY IN' DROP-DOWN MENU ABOVE.INJECTORS SOLD AS EACH ARE NOT FLOW-MATCHED (LISTED FACTORY TOLERANCE APPLIES)
ADDITIONAL
DATA
> CLICK FOR TECHNICAL BROCHURE <
