66 lb/hr High-Z Injector
Item #: 01D076x
MPN : FJ-SM-31S
$52.55
per EACH
In Stock & Ready to Ship
01D076x - 66 lb/hr Disc High-Z Fuel Injector
TYPICAL
APPLICATIONS
- High-performance aftermarket
Dynamically flowed and grouped to within 1% tolerance using Racetronix
custom injector flow bench when purchased in packs.
All
tests run with n-Heptane @ 20oC (+/-1oC), 3.0 Bar (+/-0.01 Bar), 14VDC
(+/-0.05VDC), saturated driver with RC cutoff.
This high-impedance injector will
work with all factory ECM/PCM injector drivers.
- The flat mating surface ensures that no excess fuel is present to evaporate and therefore, no deposits or clogging can occur
- Longer service life
- High-speed disc action
allows wider dynamic flow range for improved idling
Quieter operation - Revolutionary disc design resists build up deposits which can affect fuel flow
- No Fuel leakage for quicker starts
- Grease supplied to lubricate
o-rings prior to installation
FLOW-MATCHED 1% INJECTORS ARE SOLD IN PACKS VIA THE 'BUY IN' DROP-DOWN MENU ABOVE.INJECTORS SOLD AS EACH ARE NOT FLOW-MATCHED (LISTED FACTORY TOLERANCE APPLIES) Injector flow rates are based on testing with n-Heptane test solvent (0.6855 g/ml). U.S. EPA emission test gasoline 40CFR86.113 (0.735g/ml) flows in most common injector designs at about a 3 to 4% higher rate than n-Heptane. A ratio of 1.035:1 can be used when converting the flow specifications above.
