76 lb/hr Disc High-Z Fuel Injector
Item #: 01D129x
$52.97
per EACH
In Stock & Ready to Ship
01D129x (INJ79FM) - 76 lb/hr Disc High-Z Fuel Injector
TYPICAL
APPLICATIONS:
- High-performance aftermarket
- Excellent street manners given its size.
- The flat mating surface ensures that no excess fuel is present to evaporate and therefore, no deposits or clogging can occur
- Longer service life
- High-speed disc action allows wider dynamic flow range for improved idling and quieter operation
- Revolutionary disc design resists build up deposits which can affect fuel flow
- No Fuel leakage for quicker starts
- Compatible with alternative fuels (i.e. E85, Methanol)
- Grease supplied to lubricate
o-rings prior to installation
Static flow rate: 580gm/min mineral spirits (557gm/min n-Heptane)
Dynamic flow rate: 16.88 mg/pulse @ 2.5ms, 10ms period (100Hz) (16.66 n-Heptane)
Dynamic flow rate: 16.88 mg/pulse @ 2.5ms, 10ms period (100Hz) (16.66 n-Heptane)
Dynamically flowed and grouped to within 1% tolerance using Racetronix
custom injector flow bench when purchased in packs.
All
tests run with n-Heptane @ 20oC (+/-1oC), 3.0 Bar (+/-0.01 Bar), 14VDC
(+/-0.05VDC), saturated driver with RC cutoff.
Injector flow rates are based on testing with n-Heptane test solvent (0.6855
g/ml). U.S. EPA emission test gasoline 40CFR86.113 (0.735g/ml) flows in
most common injector designs at about a 3 to 4% higher rate than n-Heptane.
A ratio of 1.035:1 can be used when converting the flow specifications
above.
This high-impedance injector will
work with all factory ECM/PCM injector drivers.
FLOW-MATCHED 1% INJECTORS ARE SOLD IN PACKS VIA THE 'BUY IN' DROP-DOWN MENU ABOVE.INJECTORS SOLD AS EACH ARE NOT FLOW-MATCHED (LISTED FACTORY TOLERANCE APPLIES)
