90° Adapter, -4 AN JIC Male to 1/8” NPT Female
Quick Overview
- 90-degree adapter, -4 AN JIC male to 1/8 inch NPT female
- Takes 1/8 inch NPT sensors, gauges and plugs
- 90-degree body
- Sealant on the NPT part only, not the flare
- E85 compatible, black anodized 6061-T6 aluminum
Show More
$11.78
per EACH (USD)90° Adapter, -4 AN JIC Male to 1/8” NPT Female
Connects a 1/8" NPT male part to -4 AN plumbing with a 90-degree turn.
The Racetronix ADF-904J18FP has a -4 AN JIC male (37° flare) on one end and a 1/8" NPT female port on the other, at 90 degrees. Thread a 1/8" NPT male part, such as a sensor, gauge, plug, valve or pipe nipple, into the port, and connect a -4 AN female hose end or swivel to the JIC end.
Key features
- -4 AN JIC male (37° flare).
- 1/8"-27 NPT female port.
- 90-degree body.
- E85 compatible.
- 6061-T6 aluminum, black anodized.
The NPT port is a tapered pipe thread and seals on its threads: put a fuel-safe thread sealant (PTFE paste) on the male part you thread into it, keeping it off the first thread. The AN end seals metal to metal on its 37° flare, not on the threads. Do not put Teflon tape or thread sealant on it.
Specifications
| Part number | ADF-904J18FP |
| JIC end | -4 AN JIC male, 7/16"-20 thread, 37° flare |
| NPT end | 1/8"-27 NPT female, tapered |
| Body | 90-degree elbow |
| Material | 6061-T6 aluminum, black anodized |
| Fuel compatibility | Gasoline and E85 |
Lookup chart
Every part in this series. This part is highlighted. Click a column heading to sort by it; click again to reverse. On a phone, swipe the chart sideways.
| Part number | AN JIC male | NPT female |
|---|---|---|
| ADF-904J18FP | -4 AN | 1/8"-27 NPT |
| ADF-906J18FP | -6 AN | 1/8"-27 NPT |
| ADF-906J14FP | -6 AN | 1/4"-18 NPT |
| ADF-906J38FP | -6 AN | 3/8"-18 NPT |
| ADF-906J12FP | -6 AN | 1/2"-14 NPT |
| ADF-908J18FP | -8 AN | 1/8"-27 NPT |
| ADF-908J14FP | -8 AN | 1/4"-18 NPT |
| ADF-908J38FP | -8 AN | 3/8"-18 NPT |
| ADF-908J12FP | -8 AN | 1/2"-14 NPT |
Cross-reference: other brands
Shopping for another brand? The ADF-904J18FP replaces or compares with these parts. "Equivalent" means the same ends, thread sizes and construction (colour aside). "Similar" means a close match that differs in a detail, such as material (steel instead of aluminum), a gauge port or body length.
| Brand | Part number | Match |
|---|---|---|
| Fragola | 495023-BL | Equivalent |
| Vibrant | 11306 | Equivalent |
| Earl's | 998604ERL | Equivalent |
| XRP | 705090 | Similar |
| Redhorse | 9196-04-02-2 | Equivalent |
About this cross-reference. We compiled these equivalent part numbers from the manufacturers’ published catalogs and websites, and we update them when we can. We have not fitted or tested other brands’ parts with ours. Check the specifications, drawing and lookup chart on this page against your application before you order. Final fitment is the buyer’s responsibility. Brand names and part numbers belong to their owners and are used for reference only; Racetronix is not affiliated with these companies.
Frequently asked questions
Do I need thread sealant?
Yes, on the NPT male part that goes into the port. Never on the 37° flare end.
Will a BSP part fit the port?
No. NPT and BSP threads differ in angle and, in some sizes, pitch. Use an NPT male part.
Is it E85 compatible?
Yes. It is made from 6061-T6 aluminum and black anodized, and works with gasoline and E85.
Questions and support
Not sure which fitting your build needs? Email [email protected] before you order.
Racetronix provides technical support to verified customers through our support forum, not by phone or email. Please request forum access when you place your order so your account is approved before your parts arrive. The forum is moderated, open 24/7, and holds a knowledge base going back to 1999.
© 2026 Racetronix. All rights reserved. | Part No: ADF-904J18FP | Revision: Alpha

















