90° full-flow swivel adapter, -6 AN female to -6 AN male, black
Quick Overview
- 90-degree full-flow swivel, -6 AN JIC female to male
- Swivel nut lets you aim the elbow
- Turns a hose 90 degrees at a male port
- No tape or sealant needed
- E85 compatible, black anodized 6061-T6 aluminum
Show More
$16.56
per EACH (USD)90° Full-Flow Swivel Adapter, -6 AN JIC Female to -6 AN JIC Male, Black
Turns a -6 AN line 90 degrees right at a male port or fitting.
The Racetronix ADF-498103FF is a 90-degree elbow with a -6 AN JIC female swivel nut on one end and a -6 AN JIC male (37° flare) on the other. Thread the swivel onto a -6 AN male port, union or fitting, turn the elbow to point where the hose needs to go, and connect a -6 AN female hose end to the male end. The full-flow body keeps the passage through the bend open for less restriction than a standard elbow.
Key features
- -6 AN JIC female swivel one end, -6 AN JIC male the other (37° flare).
- Full-flow 90-degree body: the passage is not reduced at the bend.
- Swivel nut lets you aim the elbow before tightening.
- E85 compatible.
- 6061-T6 aluminum, black anodized.
Both ends seal metal to metal on their 37° flares, not on the threads. Do not use Teflon tape or thread sealant on either end; it can stop the flare from seating and cause a leak.
Specifications
| Part number | ADF-498103FF |
| Female end | -6 AN JIC female swivel, 9/16"-18 thread, 37° flare |
| Male end | -6 AN JIC male, 9/16"-18 thread, 37° flare |
| Body | Full-flow 90-degree elbow |
| Material | 6061-T6 aluminum, black anodized |
| Fuel compatibility | Gasoline and E85 |
Lookup chart
Every part in this series. This part is highlighted. Click a column heading to sort by it; click again to reverse. On a phone, swipe the chart sideways.
| Part number | AN size | Body |
|---|---|---|
| ADF-498101 | -3 AN | Standard |
| ADF-498102 | -4 AN | Standard |
| ADF-498103 | -6 AN | Standard |
| ADF-498103FF | -6 AN | Full flow |
| ADF-498104 | -8 AN | Standard |
| ADF-498105 | -10 AN | Standard |
| ADF-498106 | -12 AN | Standard |
| ADF-498108 | -16 AN | Standard |
Frequently asked questions
What does it connect to?
The female swivel threads onto any -6 AN male (37° JIC) port, union or fitting. The male end takes a -6 AN female hose end, swivel or coupler.
Do I need thread sealant or tape?
No. Both ends seal on their 37° flares. Sealant or tape can keep the flare from seating, and pieces of tape can get into the fuel system.
Is it E85 compatible?
Yes. It is made from 6061-T6 aluminum and black anodized, and works with gasoline and E85.
Questions and support
Not sure which fitting your build needs? Email [email protected] before you order.
Racetronix provides technical support to verified customers through our support forum, not by phone or email. Please request forum access when you place your order so your account is approved before your parts arrive. The forum is moderated, open 24/7, and holds a knowledge base going back to 1999.
