Adapter, 1/8" MPT » 5/32" Barb (REG)
Quick Overview
- Adapter, 1/8 inch NPT male to 5/32 inch barb
- Regulator vacuum and boost port nipple
- Sealant on the NPT threads only
- Secure the hose with a clamp
- 304 stainless steel
Show More
$9.11
per EACH (USD)Adapter, 1/8" NPT Male to 5/32" Hose Barb, Stainless Steel
Converts a 1/8" NPT port to a 5/32" hose barb.
The Racetronix ADF-B18N532SS connects 5/32" ID rubber hose to a 1/8" NPT port. It is the stainless vacuum/boost port nipple used on Racetronix fuel pressure regulators, also sold as a replacement and for other small vacuum lines.
Key features
- 1/8"-27 NPT male.
- 5/32" hose barb for rubber hose.
- 304 stainless steel.
The NPT thread is tapered and seals on its threads: use a fuel-safe thread sealant (PTFE paste) on the male NPT threads, keeping it off the first thread. Push the hose fully over the barb and secure it with a suitable hose clamp.
Specifications
| Part number | ADF-B18N532SS |
| NPT end | 1/8"-27 NPT male, tapered |
| Barb | 5/32" hose barb for rubber hose |
| Material | 304 stainless steel |
Lookup chart
Every part in this series. This part is highlighted. Click a column heading to sort by it; click again to reverse. On a phone, swipe the chart sideways.
| Part number | NPT male | Barb size |
|---|---|---|
| ADF-B18N532SS | 1/8"-27 NPT | 5/32" |
| ADF-B316N18 | 1/8"-27 NPT | 3/16" |
| ADF-B14N18 | 1/8"-27 NPT | 1/4" |
| ADF-B516N18 | 1/8"-27 NPT | 5/16" |
| ADF-B38N18 | 1/8"-27 NPT | 3/8" |
| ADF-B316N14 | 1/4"-18 NPT | 3/16" |
| ADF-B14N14 | 1/4"-18 NPT | 1/4" |
| ADF-B56N14 | 1/4"-18 NPT | 5/16" |
| ADF-B38N14 | 1/4"-18 NPT | 3/8" |
| ADF-B56N38 | 3/8"-18 NPT | 5/16" |
| ADF-B38N38 | 3/8"-18 NPT | 3/8" |
| ADF-B12N38 | 3/8"-18 NPT | 1/2" |
| ADF-B58N38 | 3/8"-18 NPT | 5/8" |
| ADF-B38N12 | 1/2"-14 NPT | 3/8" |
| ADF-B12N12 | 1/2"-14 NPT | 1/2" |
| ADF-B58N12 | 1/2"-14 NPT | 5/8" |
| ADF-B34N12 | 1/2"-14 NPT | 3/4" |
| ADF-B34N34 | 3/4"-14 NPT | 3/4" |
| ADF-B1N34 | 3/4"-14 NPT | 1" |
| ADF-B1N1 | 1"-11.5 NPT | 1" |
Frequently asked questions
Do I need thread sealant?
Yes, on the NPT threads only. NPT is a tapered thread that seals on the threads.
Questions and support
Not sure which fitting your build needs? Email [email protected] before you order.
Racetronix provides technical support to verified customers through our support forum, not by phone or email. Please request forum access when you place your order so your account is approved before your parts arrive. The forum is moderated, open 24/7, and holds a knowledge base going back to 1999.
