Adapter, -6 AN JIC Male » 5/16-24 UNEF
Quick Overview
- Adapter, -6 AN JIC male to 5/16-24 UNF male
- Straight thread, seals at the port face
- Use a crush washer, bonded washer or O-ring
- No tape on the 37-degree flare end
- E85 compatible, black anodized 6061-T6 aluminum
Show More
$5.21
per EACH (USD)Adapter, -6 AN JIC Male to 5/16"-24 UNF Straight Thread Male, Black
Connects a 5/16"-24 straight-thread port to -6 AN plumbing.
The Racetronix ADF-6J5624UNF has a -6 AN JIC male (37° flare) on one end and a 5/16"-24 UNF straight (parallel) male thread on the other. Use it to adapt a component with a 5/16"-24 straight-thread port to -6 AN hose, where no standard AN, ORB or pipe-thread adapter fits.
Key features
- -6 AN JIC male (37° flare).
- 5/16"-24 UNF straight male thread.
- Straight one-piece body.
- E85 compatible.
- 6061-T6 aluminum, black anodized.
The 5/16"-24 end is a straight thread, so it does not seal on its threads. Seal it at the port face with the part that suits your port: a crush washer, a bonded (Dowty) washer or an O-ring. None is included, because ports vary. Thread sealant is not recommended on a straight thread. The AN end seals metal to metal on its 37° flare, not on the threads. Do not put Teflon tape or thread sealant on it.
Specifications
| Part number | ADF-6J5624UNF |
| JIC end | -6 AN JIC male, 9/16"-18 thread, 37° flare |
| Straight-thread end | 5/16"-24 UNF male |
| Seal | Not included: crush washer, bonded washer or O-ring to suit the port |
| Material | 6061-T6 aluminum, black anodized |
| Fuel compatibility | Gasoline and E85 |
Lookup chart
Every part in this series. This part is highlighted. Click a column heading to sort by it; click again to reverse. On a phone, swipe the chart sideways.
| Part number | AN JIC male | Straight thread | Series |
|---|---|---|---|
| ADF-6J5624UNF | -6 AN | 5/16"-24 | UNF |
| ADF-6J3824UNF | -6 AN | 3/8"-24 | UNF |
| ADF-6J1220UNX | -6 AN | 1/2"-20 | UNF |
| ADF-6J91624UNX | -6 AN | 9/16"-24 | UNEF |
| ADF-6J5818UNX | -6 AN | 5/8"-18 | UNF |
| ADF-6J1618UNX | -6 AN | 11/16"-18 | UNS (special) |
| ADF-6J3416UNX | -6 AN | 3/4"-16 | UNF |
| ADF-6J7820UNX | -6 AN | 7/8"-20 | UNEF |
| ADF-8J3416UNX | -8 AN | 3/4"-16 | UNF |
| ADF-12J3416UNX | -12 AN | 3/4"-16 | UNF |
Frequently asked questions
Which washer or O-ring should I use?
The one your port is designed for. A flat spot-face around the port usually takes a crush or bonded washer; a port with a chamfer for an O-ring takes an O-ring. If you are not sure, a bonded washer of the matching thread size is a good general choice.
Can I use thread sealant instead?
It is not recommended. Straight threads do not seal on the threads the way tapered NPT threads do, so sealant alone is unreliable and can get into the system.
How do I check the thread?
Measure the outside diameter of the male thread and count the threads per inch with a thread gauge. UNF, UNEF and UNS threads of the same diameter have different pitches and do not interchange.
Is it E85 compatible?
Yes. It is made from 6061-T6 aluminum and black anodized, and works with gasoline and E85.
Questions and support
Not sure which fitting your build needs? Email [email protected] before you order.
Racetronix provides technical support to verified customers through our support forum, not by phone or email. Please request forum access when you place your order so your account is approved before your parts arrive. The forum is moderated, open 24/7, and holds a knowledge base going back to 1999.


