Adapter, -6 AN JIC Male to M14x1.5 Saginaw Female, Black
Quick Overview
- Adapter, -6 AN JIC male to M14x1.5 Saginaw female
- Saginaw metric O-ring style
- Seals on the O-ring, not the threads
- Power steering and fuel systems
- E85 compatible, black anodized 6061-T6 aluminum
Show More
$8.04
per EACH (USD)Adapter, -6 AN JIC Male to M14x1.5 Saginaw Female (O-Ring Style), Black
Connects a GM-style M14x1.5 Saginaw male fitting to -6 AN.
The Racetronix ADF-6JM1415SGF has a -6 AN JIC male (37° flare) on one end and an M14x1.5 Saginaw female on the other. Saginaw metric O-ring fittings are used on GM and other North American power steering and fuel systems from about 1979 on.
A Saginaw joint does not seal on its threads or on a flare. The male has a short pilot tube with an O-ring; the female has a bore that receives the pilot and a seat for the O-ring. Tightening the nut presses the O-ring into its seat. This adapter is the female: thread an M14x1.5 Saginaw male hose end or fitting into it.
Key features
- -6 AN JIC male (37° flare).
- M14x1.5 Saginaw female, pilot bore and O-ring seat.
- For power steering and fuel systems.
- E85 compatible.
- 6061-T6 aluminum, black anodized.
Earlier GM systems (before about 1979) used 45° inverted flare fittings with the same nut threads. This adapter is the metric O-ring style; check which style your pump, gear or line has before ordering. The Saginaw end seals on its O-ring and the AN end on its 37° flare: no tape or sealant.
Specifications
| Part number | ADF-6JM1415SGF |
| JIC end | -6 AN JIC male, 9/16"-18 thread, 37° flare |
| Saginaw end | M14x1.5 female, pilot bore and O-ring seat |
| Material | 6061-T6 aluminum, black anodized |
| Fuel compatibility | Gasoline and E85 |
Lookup chart
Every part in this series. This part is highlighted. Click a column heading to sort by it; click again to reverse. On a phone, swipe the chart sideways.
| Part number | AN JIC male | Saginaw thread | Saginaw end |
|---|---|---|---|
| ADF-6JM101SGF | -6 AN | M10x1.0 | Female |
| ADF-6JM101SGM | -6 AN | M10x1.0 | Male |
| ADF-6JM1210SGF | -6 AN | M12x1.0 | Female |
| ADF-6JM1415SGF | -6 AN | M14x1.5 | Female |
| ADF-6JM1415SGM | -6 AN | M14x1.5 | Male |
| ADF-6JM1615SGF | -6 AN | M16x1.5 | Female |
| ADF-6JM1615SGM | -6 AN | M16x1.5 | Male |
| ADF-6JM1815SGM | -6 AN | M18x1.5 | Male |
| ADF-8JM1415SGM | -8 AN | M14x1.5 | Male |
| ADF-8JM1615SGF | -8 AN | M16x1.5 | Female |
| ADF-8JM1615SGM | -8 AN | M16x1.5 | Male |
| ADF-8JM1815SGM | -8 AN | M18x1.5 | Male |
Frequently asked questions
How do I know if my fitting is Saginaw O-ring or inverted flare?
Disconnect the line and look: an O-ring on a short pilot tube means O-ring style; a 45° flared tube end with no O-ring means inverted flare.
Is the O-ring included?
The O-ring sits on the male fitting that goes into this adapter.
Is it E85 compatible?
Yes. It is made from 6061-T6 aluminum and black anodized, and works with gasoline and E85.
Questions and support
Not sure which fitting your build needs? Email [email protected] before you order.
Racetronix provides technical support to verified customers through our support forum, not by phone or email. Please request forum access when you place your order so your account is approved before your parts arrive. The forum is moderated, open 24/7, and holds a knowledge base going back to 1999.
