Adapter, -8 AN JIC Male to M12x1.0 Female, 60° Cone Seat
Quick Overview
- Adapter, -8 AN JIC male to M12x1.0 female
- 60-degree cone seat on the metric end
- Fits European and Asian fuel components
- No tape or sealant needed
- E85 compatible, black anodized 6061-T6 aluminum
Show More
$17.89
per EACH (USD)Adapter, -8 AN JIC Male to M12x1.0 Female, 60° Cone Seat
Connects -8 AN plumbing to a metric M12x1.0 male fitting.
The Racetronix ADF-8J1210MF has a -8 AN JIC male (37° flare) on one end and an M12x1.0 metric female nut with a 60° internal cone seat on the other. The nut turns on the body, so you can thread it onto a metric M12x1.0 male fitting with a matching 60° cone, such as a fuel pump outlet, rail or line on a European or Asian vehicle, and connect -8 AN hose to the JIC end.
Key features
- -8 AN JIC male (37° flare).
- M12x1.0 metric female nut with 60° cone seat.
- Captive nut threads on without turning the fitting; it holds the fitting in place once tight.
- E85 compatible.
- 6061-T6 aluminum, black anodized.
The AN end seals metal to metal on its 37° flare, not on the threads. Do not put Teflon tape or thread sealant on it. The metric end seals metal to metal on its 60° internal cone, so the male fitting must have a matching 60° cone. It will not seal on a bubble flare, a 24° (bite-type) metric fitting or a 37° or 45° flare.
Specifications
| Part number | ADF-8J1210MF |
| JIC end | -8 AN JIC male, 3/4"-16 thread, 37° flare |
| Metric end | M12x1.0 female nut (12 mm diameter, 1.0 mm pitch), 60° internal cone seat |
| Material | 6061-T6 aluminum, black anodized |
| Fuel compatibility | Gasoline and E85 |
Lookup chart
Every part in this series. This part is highlighted. Click a column heading to sort by it; click again to reverse. On a phone, swipe the chart sideways.
| Part number | AN JIC male | Metric female |
|---|---|---|
| ADF-6J1210MF | -6 AN | M12x1.0 |
| ADF-6J1215MF | -6 AN | M12x1.5 |
| ADF-6J1415MF | -6 AN | M14x1.5 |
| ADF-6J1615MF | -6 AN | M16x1.5 |
| ADF-8J1210MF | -8 AN | M12x1.0 |
| ADF-8J1215MF | -8 AN | M12x1.5 |
| ADF-8J1415MF | -8 AN | M14x1.5 |
| ADF-8J1615MF | -8 AN | M16x1.5 |
Frequently asked questions
How do I check the metric size?
Measure the outside diameter of the male thread (12 mm) and its pitch, the distance between threads (1.0 mm). A thread pitch gauge is the easiest way to tell 1.0, 1.25 and 1.5 mm apart.
What seat does the male fitting need?
A 60° cone. The metric threads must match as well; a 60° cone with a different thread, such as a BSP (JIS) port, will not fit.
Do I need thread sealant or tape?
No. Both ends seal metal to metal on their seats. Tape or sealant can stop them from seating, and pieces of tape can get into the fuel system.
Is it E85 compatible?
Yes. It is made from 6061-T6 aluminum and black anodized, and works with gasoline and E85.
Questions and support
Not sure which fitting your build needs? Email [email protected] before you order.
Racetronix provides technical support to verified customers through our support forum, not by phone or email. Please request forum access when you place your order so your account is approved before your parts arrive. The forum is moderated, open 24/7, and holds a knowledge base going back to 1999.









