Adapter, M14x1.5 Metric Male to 3/8” Multi-Barb
Quick Overview
- Adapter, M14x1.5 metric male to 3/8 barb
- Multi-barb for rubber hose
- Seal the metric end with a washer
- Secure the hose with a clamp
- E85 compatible, black anodized 6061-T6 aluminum
Show More
$11.64
per EACH (USD)Adapter, M14x1.5 Metric Male to 3/8” Multi-Barb
Converts an M14x1.5 port to a 3/8" hose barb.
The Racetronix ADF-B38M1415 connects 3/8" ID rubber hose to an M14x1.5 metric port.
Key features
- M14x1.5 metric male.
- 3/8" multi-barb for rubber hose.
- E85 compatible.
- 6061-T6 aluminum, black anodized.
Seal the metric end at the port face with the washer your port is designed for (crush or bonded washer). Push the hose fully over the barb and secure it with a suitable hose clamp.
Specifications
| Part number | ADF-B38M1415 |
| Metric end | M14x1.5 male (14 mm diameter, 1.5 mm pitch) |
| Barb | 3/8" multi-barb for rubber hose |
| Material | 6061-T6 aluminum, black anodized |
| Fuel compatibility | Gasoline and E85 |
Lookup chart
Every part in this series. This part is highlighted. Click a column heading to sort by it; click again to reverse. On a phone, swipe the chart sideways.
| Part number | Metric male | Barb size |
|---|---|---|
| ADF-B56M101 | M10x1.0 | 5/16" |
| ADF-B10M1015 | M10x1.5 | 10 mm |
| ADF-B38M1215 | M12x1.5 | 3/8" |
| ADF-B56M1215 | M12x1.5 | 5/16" |
| ADF-B12M1415 | M14x1.5 | 1/2" |
| ADF-B38M1415 | M14x1.5 | 3/8" |
| ADF-B56M1415 | M14x1.5 | 5/16" |
| ADF-B12M1815 | M18x1.5 | 1/2" |
| ADF-B34M1815 | M18x1.5 | 3/4" |
| ADF-B38M1815 | M18x1.5 | 3/8" |
| ADF-B8M1815 | M18x1.5 | 8 mm |
Cross-reference: other brands
Shopping for another brand? The ADF-B38M1415 replaces or compares with these parts. "Equivalent" means the same ends, thread sizes and construction (colour aside).
| Brand | Part number | Match |
|---|---|---|
| Vibrant | 11416 | Equivalent |
About this cross-reference. We compiled these equivalent part numbers from the manufacturers’ published catalogs and websites, and we update them when we can. We have not fitted or tested other brands’ parts with ours. Check the specifications, drawing and lookup chart on this page against your application before you order. Final fitment is the buyer’s responsibility. Brand names and part numbers belong to their owners and are used for reference only; Racetronix is not affiliated with these companies.
Frequently asked questions
Is it for nylon fuel tube?
No. These barbs are made for rubber hose.
Is it E85 compatible?
Yes. It is made from 6061-T6 aluminum and black anodized, and works with gasoline and E85.
Questions and support
Not sure which fitting your build needs? Email [email protected] before you order.
Racetronix provides technical support to verified customers through our support forum, not by phone or email. Please request forum access when you place your order so your account is approved before your parts arrive. The forum is moderated, open 24/7, and holds a knowledge base going back to 1999.
© 2026 Racetronix. All rights reserved. | Part No: ADF-B38M1415 | Revision: Bravo









