Welcome to Racetronix
Welcome to Racetronix  |  All prices indicated are in USD($)  905-477-7014  |   Help   |  Catalogs  |  About Us
New ArrivalOn SaleFeatured

Bosch Fuel Injector, 50 lb/hr, 520 cc/min, USCAR EV 14S

Quick Overview

  • Genuine Bosch High-Performance Fuel Injector
  • 50 lb/hr, 374 g/min, 520 cc/min @ 300 kPa
  • EV 14S (Standard) Body Type
  • 15° Split-stream with 12° offset angle dual cone spray (E-Type)
  • High-impedance, USCAR Electrical connection

Show More
Item #: 0280158117

$39.36

$56.08

per EACH (USD)
This is an obsolete Item
 
 
 In Stock & Ready to Ship

Bosch EV14 Fuel Injector - 50 lb/hr (520cc)

Genuine Bosch | Part #: 0 280 158 117

Body Type Standard (S)

Product Overview

The Bosch 0 280 158 117 is a high-performance EV 14 injector featuring the "Standard" (S) body geometry (48.65mm). Commonly known as the "50lb" or "520cc" injector, this unit features a modern USCAR / EV6 connector and a Type E (Dual Cone) spray pattern designed for precise targeting in multi-valve cylinder heads.

Verified Configuration Note: This unit is verified to have Blue (Upper) and Green (Lower) O-rings.
  • Flow Capacity: Rated at 50 lb/hr / 520 cc/min (374 g/min) at 300 kPa (43.5 PSI).
  • Volumetric Flow: ~547 cc/min (N-Heptane) / ~520 cc/min (Gasoline). *See Tech Note
  • Fuel & Seal Compatibility: Features high-quality Viton O-rings (Blue Upper / Green Lower) and stainless internals. Fully compatible with E85, Methanol, and Gasoline.
  • Electrical Connection: Features a standard USCAR / EV6 connector housing.
Spray Pattern: Type E (Dual Cone) Bosch E-Type Spray Pattern
Alpha: Alpha 15° (Split Angle)
Gamma: Gamma 12° (Bent Angle)
Delta: Delta 270° (Rotation)
Connector Orientation: Spray Orientation Guide

*Connector is clocked 90° relative to the spray split.

Technical Specifications

Coil Resistance12.0 Ohms (High-Z)
Connector StyleUSCAR / EV6
Body Length48.65 mm (Standard)
Flow Calibration Data (@ 3 Bar / 43.5 PSI)
Mass Flow (Factory):
374 g/min
Industry Std (N-Heptane):
~547 cc/min
Gasoline Estimate:
~520 cc/min

Dimensions & Fitment

The 0280158117 uses the EV 14 S (Standard) body geometry. Please verify fitment using the diagrams below.

Bosch EV14 Standard Dimensions
Bosch EV14 Dimensions Family

*This unit is the Standard length (3rd from Left).

Technical Note: Flow Rating & Fluids

Bosch calibrates injectors using N-Heptane as a standard test fluid. However, most engines run on Gasoline, which has a higher density. We provide both ratings for transparency:

Volume (cc/min) = Mass Flow (g/min) ÷ Fluid Density (g/cc)
  • N-Heptane (0.684 g/cc): 374 ÷ 0.684 = 546.8 cc/min (Industry Standard Rating)
  • Gasoline (~0.720 g/cc): 374 ÷ 0.720 = 519.4 cc/min (Real World Estimate)

  • Factory new Genuine Bosch High-Performance Fuel Injector.
  • Factory installed o-rings top and bottom.
  • Shipped in factory-sealed Bosch boxes or in bulk bagged format as provided by Bosch.
  • Flow Matching: Injectors sold individually ("each") are not flow-matched by Racetronix.
  • Absolutely no returns on open-box fuel injectors. Know your application before making your purchase.

*Data Integrity Disclaimer: This specification data is derived from official Bosch technical documentation. We strongly recommend that your tuner verifies all flow and latency (dead-time) data prior to final calibration.