Distribution Cube, 1/8” BSPT Male to BSPT Female + 4 x 1/8” NPT, Stainless
Quick Overview
- Stainless distribution cube, 1/8" BSPT
- 1/8" BSPT male in, BSPT female on top
- Four 1/8" NPT female side ports
- Run a factory sender plus sensors or gauges
- Three 1/8" NPT plugs included, stainless
Show More
$41.23
per EACH (USD)Distribution Cube, 1/8" BSPT Male to BSPT Female + 4 x 1/8" NPT, Stainless
Stainless steel cube: 1/8" BSPT male in, 1/8" BSPT female on top and four 1/8" NPT female side ports. For oil or fuel pressure senders, gauges and feeds on BSPT ports.
The Racetronix MFD-CB18BSS distribution cube is a port expansion manifold. It screws into a 1/8" BSPT (British tapered pipe) port and gives you the same BSPT thread on top plus four 1/8" NPT ports around the sides. Use it to run a factory BSPT sender and an aftermarket NPT sensor or gauge line, or a turbo oil feed, from one engine port.
Key features
- One BSPT port becomes six: BSPT male in, BSPT female out, four 1/8" NPT side ports.
- Mix BSPT and NPT parts: keep a factory BSPT sender and add NPT sensors or gauge lines.
- Three 1/8" NPT plugs included for the ports you do not use.
- Solid stainless steel body: corrosion resistant, suits oil, fuel, coolant and air.
- Laser-marked part number and Racetronix logo.
Ports
| Port | Thread | Qty | Use |
|---|---|---|---|
| Bottom | 1/8" BSPT male (1/8"-28) | 1 | Into the engine or component port |
| Top | 1/8" BSPT female | 1 | Factory sender or a BSPT fitting |
| Sides | 1/8" NPT female (1/8"-27) | 4 | Gauges, sensors, extra feeds; three plugs included |
Specifications
| Part number | MFD-CB18BSS |
| Type | Distribution cube |
| Material | 303 stainless steel, natural finish |
| Thread sealing | Tapered pipe threads: use a thread sealant suitable for the fluid |
| Body | 22.2 mm (0.87") cube; 37.0 mm (1.46") overall height |
| Included | Three 1/8" NPT hex socket plugs |
Manifold and cube chart: the full range
Every manifold, cube and block in this range. Click a column heading to sort.
| Part | Type | Ports | Material |
|---|---|---|---|
| MFD-16RF4Y12JF | Quad manifold | 1 x -16 AN ORB female (1-5/16"-12), 4 x -12 (1-1/16"-12) female: accepts -12 AN JIC male or -12 AN ORB male, 1 x 1/8" NPT female (1/8"-27) | Billet 6061-T6 aluminum |
| MFD-CB18BSS | Distribution cube | 1 x 1/8" BSPT male (1/8"-28), 1 x 1/8" BSPT female, 4 x 1/8" NPT female (1/8"-27) | 303 stainless steel |
| MFD-CB18NSS | Distribution cube | 1 x 1/8" NPT male (1/8"-27), 5 x 1/8" NPT female | 303 stainless steel |
| MFD-HX18BSS | Hex manifold | 1 x 1/8" BSPT male (1/8"-28), 1 x 1/8" BSPT female (1/8"-28), 2 x 1/8" NPT female (1/8"-27) | 304 stainless steel |
| MFD-HX18NSS | Hex manifold | 1 x 1/8" NPT male, 1 x 1/8" NPT female, 2 x 1/8" NPT female (1/8"-27) | 303 stainless steel |
| MFD-HXM10N18SS | Hex manifold | 1 x M10 x 1.0 male, 1 x M10 x 1.0 female, 2 x 1/8" NPT female (1/8"-27) | 304 stainless steel |
| MFD-HXM12N18SS | Hex manifold | 1 x M12 x 1.5 male, 1 x M12 x 1.5 female, 2 x 1/8" NPT female (1/8"-27) | 304 stainless steel |
| MFD-HXM15N18SS | Hex manifold | 1 x M10 x 1.5 male, 1 x M10 x 1.5 female, 2 x 1/8" NPT female (1/8"-27) | 304 stainless steel |
| VBLOCK-GRD4XS | Guard | Guard for VBLOCK-X13S | 6061-T6 aluminum |
| VBLOCK-X10L | Boost/vacuum block | 2 x 3/8" NPT female (3/8"-18), 4 x 1/8" NPT female (1/8"-27), 4 + 4 x 1/8" NPT female (1/8"-27) | 6061 aluminum |
| VBLOCK-X13S | Boost/vacuum block | 2 x 3/8" NPT female (3/8"-18), 4 x 1/8" NPT female (1/8"-27), 8 x 1/8" NPT female (1/8"-27) | 6061 aluminum |
| VBLOCK-X13SK1 | Boost/vacuum block kit | Kit: block, guard, gauge, 11 plugs | 6061 aluminum block and 6061-T6 aluminum guard |
Frequently asked questions
BSPT and NPT look alike. Do they interchange?
No. 1/8" BSPT has 28 threads per inch and a 55-degree thread form; 1/8" NPT has 27 and a 60-degree form. They can start by hand but will not seal. Check your port before ordering; our MFD-CB18NSS is the all-NPT version.
How do I seal the threads?
Pipe threads seal on the thread taper. Use a liquid or paste thread sealant rated for the fluid (oil, fuel or coolant). Keep tape and sealant off the first thread so nothing enters the system.
Questions and support
Questions before you order? Email [email protected].
Racetronix provides technical support to verified customers through our support forum, not by phone or email. Please request forum access when you place your order so your account is approved before your parts arrive. The forum is moderated, open 24/7, and holds a knowledge base going back to 1999.























