Filter, inline Flare -6AN, SS 250µ
Quick Overview
- Inline flare filter, -6 AN, 250 micron
- Fits inside an existing JIC joint
- Stainless steel screen
- 37-degree flange seals between flares
- No extra fitting needed
Show More
$18.37
per EACH (USD)Inline Flare Filter, -6 AN, 250 Micron Stainless
Filters a -6 AN line inside an existing JIC joint.
The Racetronix FILTER-ILF06 is a 250-micron stainless steel filter screen that fits inside a -6 AN JIC joint. Drop it into the male JIC fitting: its flange is formed at 37° and sits on the male flare. When you tighten the female JIC nut, the flange is clamped between the two flares, sealing the joint and filtering the flow, with no extra fitting in the line.
Key features
- Fits inside a -6 AN JIC joint.
- 250-micron stainless steel screen.
- 37° flange seals between the flares.
- Stainless steel.
Seat the filter flange on the male flare, fit the female nut over it and tighten as normal. Do not use tape or sealant. Inspect and clean or replace the screen at service intervals.
Specifications
| Part number | FILTER-ILF06 |
| Size | -6 AN (JIC 37°) |
| Screen | 250 micron stainless steel mesh |
| Seal | 37° flange clamped between male and female flares |
| Material | Stainless steel |
Lookup chart
Every part in this series. This part is highlighted. Click a column heading to sort by it; click again to reverse. On a phone, swipe the chart sideways.
| Part number | AN size |
|---|---|
| FILTER-ILF06 | -6 AN |
| FILTER-ILF08 | -8 AN |
| FILTER-ILF10 | -10 AN |
| FILTER-ILF12 | -12 AN |
| FILTER-ILF16 | -16 AN |
| FILTER-ILF20 | -20 AN |
Frequently asked questions
Does it need its own fitting?
No. It sits inside a joint you already have, between a male and a female JIC fitting of the same size.
Questions and support
Not sure which fitting your build needs? Email [email protected] before you order.
Racetronix provides technical support to verified customers through our support forum, not by phone or email. Please request forum access when you place your order so your account is approved before your parts arrive. The forum is moderated, open 24/7, and holds a knowledge base going back to 1999.
