Hex Manifold, M12 x 1.5 Male to M12 x 1.5 Female + 2 x 1/8” NPT, Stainless
Quick Overview
- Stainless inline hex manifold, M12x1.5
- Male one end, female the other
- Two 1/8" NPT female side ports
- Port expansion for gauges, sensors and feeds
- Solid stainless steel
Show More
$22.40
per EACH (USD)Hex Manifold, M12 x 1.5 male to M12 x 1.5 female + 2 x 1/8" NPT, Stainless
Inline stainless tee: M12 x 1.5 male in, M12 x 1.5 female out, two 1/8" NPT female side ports. Adds a gauge or second sender to a M12x1.5 port.

Photo shows the 1/8" NPT version (MFD-HX18NSS); this part has the same body with M12x1.5 threads on the ends.
The Racetronix MFD-HXM12N18SS hex manifold is an inline port expansion manifold. It goes between a M12x1.5 port and the part that screws into it. The male end goes into the port, the original sender or fitting goes into the female end, and the two 1/8" NPT side ports take a gauge line, an aftermarket sensor or a switch.
Key features
- M12 x 1.5 male in, M12 x 1.5 female out: keeps your existing sender or fitting in place.
- Two 1/8" NPT side ports for port expansion: a gauge line, an extra sensor, a switch or a feed to another component.
- Solid stainless steel hex body: corrosion resistant, suits oil, fuel, coolant and air.
- Laser-marked part number and Racetronix logo.
Ports
| Port | Thread | Qty | Use |
|---|---|---|---|
| End (in) | M12 x 1.5 male | 1 | Into the engine or component port |
| End (out) | M12 x 1.5 female | 1 | Original sender or fitting |
| Sides | 1/8" NPT female (1/8"-27) | 2 | Gauge, sensor, switch or extra feed |
Specifications
| Part number | MFD-HXM12N18SS |
| Type | Hex manifold |
| Material | 304 stainless steel, natural finish |
| Body | 17.45 mm (0.69") hex, 50.8 mm (2.00") overall length |
| Internal passage | 5.5 mm drilled through |
Manifold and cube chart: the full range
Every manifold, cube and block in this range. Click a column heading to sort.
| Part | Type | Ports | Material |
|---|---|---|---|
| MFD-16RF4Y12JF | Quad manifold | 1 x -16 AN ORB female (1-5/16"-12), 4 x -12 (1-1/16"-12) female: accepts -12 AN JIC male or -12 AN ORB male, 1 x 1/8" NPT female (1/8"-27) | Billet 6061-T6 aluminum |
| MFD-CB18BSS | Distribution cube | 1 x 1/8" BSPT male (1/8"-28), 1 x 1/8" BSPT female, 4 x 1/8" NPT female (1/8"-27) | 303 stainless steel |
| MFD-CB18NSS | Distribution cube | 1 x 1/8" NPT male (1/8"-27), 5 x 1/8" NPT female | 303 stainless steel |
| MFD-HX18BSS | Hex manifold | 1 x 1/8" BSPT male (1/8"-28), 1 x 1/8" BSPT female (1/8"-28), 2 x 1/8" NPT female (1/8"-27) | 304 stainless steel |
| MFD-HX18NSS | Hex manifold | 1 x 1/8" NPT male, 1 x 1/8" NPT female, 2 x 1/8" NPT female (1/8"-27) | 303 stainless steel |
| MFD-HXM10N18SS | Hex manifold | 1 x M10 x 1.0 male, 1 x M10 x 1.0 female, 2 x 1/8" NPT female (1/8"-27) | 304 stainless steel |
| MFD-HXM12N18SS | Hex manifold | 1 x M12 x 1.5 male, 1 x M12 x 1.5 female, 2 x 1/8" NPT female (1/8"-27) | 304 stainless steel |
| MFD-HXM15N18SS | Hex manifold | 1 x M10 x 1.5 male, 1 x M10 x 1.5 female, 2 x 1/8" NPT female (1/8"-27) | 304 stainless steel |
| VBLOCK-GRD4XS | Guard | Guard for VBLOCK-X13S | 6061-T6 aluminum |
| VBLOCK-X10L | Boost/vacuum block | 2 x 3/8" NPT female (3/8"-18), 4 x 1/8" NPT female (1/8"-27), 4 + 4 x 1/8" NPT female (1/8"-27) | 6061 aluminum |
| VBLOCK-X13S | Boost/vacuum block | 2 x 3/8" NPT female (3/8"-18), 4 x 1/8" NPT female (1/8"-27), 8 x 1/8" NPT female (1/8"-27) | 6061 aluminum |
| VBLOCK-X13SK1 | Boost/vacuum block kit | Kit: block, guard, gauge, 11 plugs | 6061 aluminum block and 6061-T6 aluminum guard |
Frequently asked questions
Does the metric end need a washer?
Metric straight threads do not seal on the thread. Seal the male end with a crush or bonded washer of the right size (M12) against the port face.
Which way round does it go?
The male end screws into the port on the engine or component. Your original part screws into the female end. The side ports are always 1/8" NPT.
Questions and support
Questions before you order? Email [email protected].
Racetronix provides technical support to verified customers through our support forum, not by phone or email. Please request forum access when you place your order so your account is approved before your parts arrive. The forum is moderated, open 24/7, and holds a knowledge base going back to 1999.







