Welcome to Racetronix
Welcome to Racetronix  |  All prices indicated are in USD($)  905-477-7014  |   Help   |  Catalogs  |  About Us

Nylon Split Wire Loom, 1” x 10 ft, Black

Quick Overview

  • Nylon split wire loom, 1" (25.4 mm) x 10 ft, black
  • Drossbach nylon 6 split loom, made in Canada
  • Rated -40 to 257 degrees F continuous, 300 F short term
  • Slit along its length: fits finished harnesses
  • Bends round tight curves without the slit opening

Show More
Item #: LOOM-N-1-10

$5.00

per EACH (USD)
This is an obsolete Item
 
 
 In Stock & Ready to Ship

Nylon Split Wire Loom, 1" x 10 ft, Black

Ribbed nylon tubing, slit along its length: the classic OEM way to protect engine bay harnesses, wires and small hoses. Drossbach nylon 6, made in Canada.

Black nylon split wire loom

Nylon split wire loom is automotive-grade convoluted (ribbed) tubing, slit along its length so wires go in through the side. It is Drossbach Nylon (D) split loom, made in Canada from nylon 6 and rated -40°F to 257°F continuous, with short-term exposure to 300°F, which suits it to engine bays. The ribs let it follow tight curves without the slit opening up, and it is light and flexible. It protects cables, tubing, hoses and wire harnesses from rubbing and gives a factory look. This is the 1" size in a 10 ft length.

Key features

  • Drossbach nylon 6 split loom, made in Canada.
  • -40°F to 257°F continuous, 300°F short term: suits engine bays.
  • Split along its length: wires go in through the side, so it fits finished harnesses.
  • Ribbed (convoluted) wall bends round tight curves without the slit opening.
  • Pre-cut 10 ft length, black.

Which size do I need?

Split loom is sized by its nominal inside diameter. Choose the size equal to or a little larger than the bundle, so the slit closes fully. For a bundle that is growing, go up a size.

PartSize (nominal ID)Size (mm)Length
LOOM-N-1-4-251/4"6.325 ft
LOOM-N-1-4-501/4"6.350 ft
LOOM-N-3-8-253/8"9.525 ft
LOOM-N-3-8-503/8"9.550 ft
LOOM-N-1-2-201/2"12.720 ft
LOOM-N-5-8-155/8"15.915 ft
LOOM-N-3-4-153/4"19.015 ft
LOOM-N-1-101"25.410 ft

All sizes are black, sold each in the length shown.

Specifications

ConstructionConvoluted (ribbed) tubing, slit along its length
MakerDrossbach North America (Canada), Nylon (D) line
MaterialNylon 6
Size1" (25.4 mm) nominal ID
Temperature-40°F to 257°F (-40°C to 125°C) continuous; 300°F (149°C) short term
Length10 ft
ColourBlack
SoldEach, pre-cut

Fitting split loom

  1. Cut the loom to length with side cutters or a sharp knife, square across the ribs.
  2. Open the slit and push the wires in, working from one end.
  3. At a branch, cut a notch in the side of the main loom for the branch to leave through.
  4. Secure the ends and branches with tape or cable ties so the loom cannot slide.

Which sleeving do I need?

All of these protect wires and hoses from rubbing and dress them neatly. They differ in how they go on and how they look:

  • Expandable braid (Flexo PET, Chrome, Chrome XC) is a closed tube. It opens up to slide over connectors and fittings, then pulls down snug. Best when you can thread the run before the ends are terminated.
  • Self-wrapping split sleeve (F6, F6 Woven Wrap, F6 Quiet) is split along its length and curls closed by itself. It goes on a finished harness, and wires can be added or taken out later.
  • Split loom (nylon) is a ribbed tube with a slit: the classic OEM engine bay look.

None of these is heat protection for lines near headers or turbos. For that, see FireFlex fire sleeve, T6 ThermaShield and Insultherm Tru-Fit fiberglass sleeving.

ProductWhat it isHow it goes onContinuous ratingBest for
Techflex Flexo PETExpandable braid of 10 mil PET monofilamentSlides on; expands up to 150% to pass connectors257°F (125°C)Harnesses, hoses and cables: protection, a neat finish and colour coding
Techflex Flexo ChromeMetallized Mylar braid with clear PET strands: an open, glinting lookSlides on; expands257°F (125°C)The look of braided stainless, with the colour underneath showing through
Techflex Flexo Chrome XCFull-coverage metallized Mylar braidSlides on; narrow expansion range257°F (125°C)A smooth, continuous chrome look on hoses and cables
Techflex F6Self-wrapping split PET braid, 25% overlapWraps on: no fasteners, no need to unplug anything257°F (125°C)Finished harnesses; wires added or removed later; around inline connectors
Techflex F6 Woven WrapSelf-closing woven split sleeve, 23% to 51% overlapWraps on and snaps closedNot published; melts at 482°F (250°C)High-coverage harness wrapping
Techflex F6 QuietSoft self-wrapping split braid with a cotton-loom feelWraps on257°F (125°C)Quietening harnesses in doors and dashes; restorations
Drossbach nylon split wire loomRibbed (convoluted) nylon 6 tube, slit along its lengthPushes on through the slit-40°F to 257°F continuous (300°F short term)OEM-style protection for engine bay harnesses

Frequently asked questions

Nylon split loom or braided sleeving?

Split loom is stiffer and tougher against knocks, with the factory look. Flexo PET braid is lighter and neater, and F6 wraps on like loom but is a soft braid.

Can I add wires later?

Yes. Open the slit and push the new wire in.

Who makes it?

Our braided sleevings are Techflex; this nylon loom comes from a separate supplier of automotive-grade loom.

Ratings are the supplier's published figures.