Welcome to Racetronix
Welcome to Racetronix  |  All prices indicated are in USD($)  905-477-7014  |   Help   |  Catalogs  |  About Us

O-Ring, Fuel Injector, AS568-203 (0.296” ID x 0.139”), FKM GF-600S 75A, Brown

Quick Overview

  • Fuel injector O-ring, AS568-203
  • 0.296" (7.52 mm) ID x 0.139" (3.53 mm) cross-section
  • FKM GF-600S 75A, brown
  • Gasoline, E85, ethanol, methanol and biodiesel
  • Sold each

Show More
Item #: RGF-203

$1.08

per EACH (USD)
This is an obsolete Item
 
 
 In Stock & Ready to Ship

O-Ring, Fuel Injector, AS568-203 (0.296" ID x 0.139"), FKM GF-600S 75A, Brown

FKM GF-600S 75A fuel injector O-ring, AS568-203: 0.296" (7.52 mm) ID x 0.139" (3.53 mm) cross-section x 0.574" (14.58 mm) OD. A standard AS568-203 size fuel injector O-ring in GF-600S, the FKM grade for alcohol fuels: E85, ethanol and methanol.

RGF-203 fuel injector O-ring

The Racetronix RGF-203 is a FKM GF-600S 75A O-ring for sealing a fuel injector in its fuel rail cup or intake port. A standard AS568-203 size fuel injector O-ring in GF-600S, the FKM grade for alcohol fuels: E85, ethanol and methanol. Replace injector O-rings whenever an injector is removed, or if a seal is flattened, cracked or cut. In 100% ethanol the GF-600S compound swells about 1.1% by volume after 336 hours at 23 C, against about 5% for a standard FKM.

Key features

  • AS568-203: 0.296" (7.52 mm) ID x 0.139" (3.53 mm) cross-section x 0.574" (14.58 mm) OD.
  • FKM GF-600S 75A, Brown colour.
  • Fluid resistance: gasoline, e85, ethanol, methanol and biodiesel.
  • Sold each.

Fuel injector O-ring chart: all sizes

All Racetronix fuel injector O-rings. Click a column heading to sort.

PartSizeMaterialColourIDCross-sectionOD
RV202BRAS568-202FKM (Viton) 75ABrown0.234" (5.94 mm)0.139" (3.53 mm)0.512" (13.00 mm)
RV203BKAS568-203FKM (Viton) 75ABlack0.296" (7.52 mm)0.139" (3.53 mm)0.574" (14.58 mm)
RV203GRAS568-203FKM (Viton) 75AGreen0.296" (7.52 mm)0.139" (3.53 mm)0.574" (14.58 mm)
RV203SMPAS568-203FKM (Viton) 75ABrown0.296" (7.52 mm)0.139" (3.53 mm)0.574" (14.58 mm)
RGF-203AS568-203FKM GF-600S 75ABrown0.296" (7.52 mm)0.139" (3.53 mm)0.574" (14.58 mm)
RV04X08BKMetricFKM (Viton) 75ABlack8.00 mm (0.315")4.00 mm (0.157")16.00 mm (0.630")

Tech drawing/schematic

Racetronix RGF-203 drawing with dimensions

Click the drawing to enlarge. Dimensions in inches, millimeters in brackets.

Specifications

Part numberRGF-203
SizeAS568-203
Inside diameter0.296" (7.52 mm)
Cross-section0.139" (3.53 mm)
Outside diameter0.574" (14.58 mm)
MaterialFKM GF-600S 75A
ColourBrown
Fluid resistanceGasoline, E85, ethanol, methanol and biodiesel
SoldEach

Frequently asked questions

How do I fit an injector O-ring?

Lubricate it lightly with clean engine oil or O-ring lubricant, roll it into the groove without stretching it more than needed, and push the injector straight into the rail or port with a slight twist. Never install O-rings dry.

Which size do I need?

Compare the old O-ring with the chart above, or measure its inside diameter and cross-section. Injectors of the same make and series use the same O-rings.

Questions and support

Questions before you order? Email [email protected].

Racetronix provides technical support to verified customers through our support forum, not by phone or email. Please request forum access when you place your order so your account is approved before your parts arrive. The forum is moderated, open 24/7, and holds a knowledge base going back to 1999.

© 2026 Racetronix. All rights reserved. | Part No: RGF-203 | Revision: Bravo