O-Ring, Fuel Injector, AS568-203 (0.296” ID x 0.139”), FKM (Viton) 75A, Brown, for SMP Injectors
Quick Overview
- Fuel injector O-ring, AS568-203
- 0.296" (7.52 mm) ID x 0.139" (3.53 mm) cross-section
- FKM (Viton) 75A, brown
- Gasoline, diesel and oils
- Sold each
Show More
$1.00
per EACH (USD)O-Ring, Fuel Injector, AS568-203 (0.296" ID x 0.139"), FKM (Viton) 75A, Brown, for SMP Injectors
FKM (Viton) 75A fuel injector O-ring, AS568-203: 0.296" (7.52 mm) ID x 0.139" (3.53 mm) cross-section x 0.574" (14.58 mm) OD. The O-ring used on the SMP (Standard Motor Products) fuel injectors sold by Racetronix.
The Racetronix RV203SMP is a FKM (Viton) 75A O-ring for sealing a fuel injector in its fuel rail cup or intake port. The O-ring used on the SMP (Standard Motor Products) fuel injectors sold by Racetronix. Replace injector O-rings whenever an injector is removed, or if a seal is flattened, cracked or cut.
Key features
- AS568-203: 0.296" (7.52 mm) ID x 0.139" (3.53 mm) cross-section x 0.574" (14.58 mm) OD.
- FKM (Viton) 75A, Brown colour.
- Fluid resistance: gasoline, diesel and oils.
- Sold each.
Fuel injector O-ring chart: all sizes
All Racetronix fuel injector O-rings. Click a column heading to sort.
| Part | Size | Material | Colour | ID | Cross-section | OD |
|---|---|---|---|---|---|---|
| RV202BR | AS568-202 | FKM (Viton) 75A | Brown | 0.234" (5.94 mm) | 0.139" (3.53 mm) | 0.512" (13.00 mm) |
| RV203BK | AS568-203 | FKM (Viton) 75A | Black | 0.296" (7.52 mm) | 0.139" (3.53 mm) | 0.574" (14.58 mm) |
| RV203GR | AS568-203 | FKM (Viton) 75A | Green | 0.296" (7.52 mm) | 0.139" (3.53 mm) | 0.574" (14.58 mm) |
| RV203SMP | AS568-203 | FKM (Viton) 75A | Brown | 0.296" (7.52 mm) | 0.139" (3.53 mm) | 0.574" (14.58 mm) |
| RGF-203 | AS568-203 | FKM GF-600S 75A | Brown | 0.296" (7.52 mm) | 0.139" (3.53 mm) | 0.574" (14.58 mm) |
| RV04X08BK | Metric | FKM (Viton) 75A | Black | 8.00 mm (0.315") | 4.00 mm (0.157") | 16.00 mm (0.630") |
Specifications
| Part number | RV203SMP |
| Size | AS568-203 |
| Inside diameter | 0.296" (7.52 mm) |
| Cross-section | 0.139" (3.53 mm) |
| Outside diameter | 0.574" (14.58 mm) |
| Material | FKM (Viton) 75A |
| Colour | Brown |
| Fluid resistance | Gasoline, diesel and oils |
| Sold | Each |
Frequently asked questions
How do I fit an injector O-ring?
Lubricate it lightly with clean engine oil or O-ring lubricant, roll it into the groove without stretching it more than needed, and push the injector straight into the rail or port with a slight twist. Never install O-rings dry.
Which size do I need?
Compare the old O-ring with the chart above, or measure its inside diameter and cross-section. Injectors of the same make and series use the same O-rings.
Questions and support
Questions before you order? Email [email protected].
Racetronix provides technical support to verified customers through our support forum, not by phone or email. Please request forum access when you place your order so your account is approved before your parts arrive. The forum is moderated, open 24/7, and holds a knowledge base going back to 1999.





