Techflex Insultherm Spark Plug Boot Sleeve, 7-1/2”, Black
Quick Overview
- Techflex Insultherm spark plug boot sleeve, 7-1/2 in, Black
- Double-thick braided fiberglass, triple-thick at the sewn end
- Protects plug boots from heat up to 1,200 degrees F
- Can rest directly on the header; fits straight and right-angle boots
- Sold each
Show More
$3.32
per EACH (USD)Techflex Insultherm Spark Plug Boot Sleeve, 7-1/2" Long, Black
Double-thick braided fiberglass sleeve that slips over the plug wire boot: protects it from header heat up to 1,200°F (649°C) and can rest right on the pipe.

These are Techflex Insultherm spark plug boot sleeves: double-thickness braided fiberglass, triple-thick at the sewn end, 3/4" in diameter and 7-1/2" long. Racetronix is a Techflex distributor. Slip one over any plug wire and boot, straight or right-angle, and the boot is protected from engine and header heat up to 1,200°F (649°C). Once fitted, the maker says the sleeve needs no clearance from hot surfaces and can rest directly on a header. This version has no ring. Sold each.
Key features
- Protects plug boots from heat up to 1,200°F (649°C); can touch the header.
- Double wall, triple-thick at the sewn end.
- Non-conductive, will not support combustion, resists engine chemicals; UL VW-1.
- Extreme abrasion resistance in the maker's test.
- 7-1/2" long: covers straight and right-angle boots. Sold each.
Boot sleeves we stock
| Part | Inner ring | Colour | Length | Diameter | Wall |
|---|---|---|---|---|---|
| 299-FCN0.75-BK | No | Black | 7-1/2" | 3/4" | 0.085" |
| 299-FCN0.75-NT | No | Natural | 7-1/2" | 3/4" | 0.085" |
| 299-FCU0.75-BK | Yes | Black | 7-1/2" | 3/4" | 0.085" |
| 299-FCU0.75-NT | Yes | Natural | 7-1/2" | 3/4" | 0.085" |
All four are the same length, diameter and rating; choose by colour and whether you want the inner ring. Sold each.
Equivalents: other brands' plug boot sleeves
Shopping for another brand? These are fiberglass plug boot sleeves. Most are 1" across and 6" to 7" long, so they are near equivalents rather than identical.
| Our part | Instead of (brand) | Their part number | Description | Match |
|---|---|---|---|---|
| 299-FCN0.75-BK | DEI | 010510 / 010509 / 010518 | Ringless boot sleeve, 7", 2 / 4 / 8 pack | Near equivalent |
| 299-FCN0.75-BK | Heatshield Products | 400204 / 400804 | Double-wall boot sleeve, black, 1" x 6", 2 / 8 pack | Near equivalent |
| 299-FCN0.75-NT | Heatshield Products | 400200 / 400800 | Double-wall boot sleeve, tan, 1" x 6", 2 / 8 pack | Near equivalent |
| 299-FCU0.75-BK | DEI | 010511 / 010512 | Boot sleeve with reinforcement ring, black, 1" x 6" | Near equivalent |
| 299-FCU0.75-NT | DEI | 010501 / 010507 / 010502 | Boot sleeve with reinforcement ring, silver, 1" x 6", 2 / 4 / 8 pack | Near equivalent |
Other brands' names and part numbers are their owners' trademarks, listed only to help you compare. Check sizes against your application.
Specifications
| Construction | Resin-coated braided fiberglass, double wall, triple-thick at the sewn end |
| Length | 7-1/2" (191 mm) |
| Diameter | 3/4" (19 mm) |
| Wall | 0.085" (2.2 mm) |
| Inner ring | No |
| Temperature | Up to 1,200°F (649°C) |
| Flammability | UL VW-1; will not support combustion; halogen free |
| Colour | Black |
| Sold as | Each |
Fitting boot sleeves
- Pull the plug wire off the plug by its boot, not the wire.
- Slide the sleeve over the boot so it covers the boot fully.
- Refit the wire to the plug and check the boot has clicked home.
- Do one cylinder at a time so the firing order stays right.
Which heat protection do I need?
Heat reaches a hose or wire in three ways, and each needs a different kind of protection.
- Radiant heat. A header or turbo throws heat out in every direction, like a stove element, and it reaches anything in line of sight. Reflective foil stops it best: the aluminized face bounces it back before it gets in.
- Heat soak. Hot air and nearby hot parts warm a line slowly and steadily. Insulation stops it. Braided fiberglass traps thousands of tiny pockets of still air, the same way the insulation in a house wall does, and still air carries heat very poorly. Squash the fiberglass and the air goes, and most of the insulation with it.
- Flame, sparks and splash. A burst line, a backfire or weld spatter. This needs a covering that will not burn: a silicone jacket or a non-flammable fibre.
Foil-over-fiberglass products combine the first two: the foil reflects, the fiberglass insulates. Nothing should rest against a bare header; wrap the header, shield the line, or both.
| Situation | Use | Why it works |
|---|---|---|
| The exhaust itself: headers, down pipes, turbo crossovers | Header wrap | Keeps the heat inside the pipe, so far less of it radiates onto the hoses, wiring and bodywork around it. The best fix is usually at the source. |
| A hose or harness close to a header or turbo (strong radiant heat) | T6 ThermaShield split tube or ThermaShield Convoluted | The aluminized face reflects most of the radiant heat before it gets in, and the fiberglass behind it insulates against what does get through. |
| A firewall, floor pan, fuel cell or ECU box facing the exhaust | ThermaShield Flat or ThermaShield Wrap | The same foil over fiberglass, as a sheet that sticks on or wraps around odd shapes. |
| Lines in a hot engine bay: steady heat soak, little direct radiant heat | FireFlex fire sleeve | A thick layer of fiberglass holds still air, which insulates; the silicone jacket seals out oil, fuel and splash. Leave at least 1/8" of air gap so the fiberglass is never squashed. |
| Single wires, sensor and thermocouple leads near heat | Insultherm Tru-Fit fiberglass sleeving | A thin fiberglass braid that insulates without adding bulk. |
| Plug wire boots close to the headers | Insultherm spark plug boot sleeves | Double-thick fiberglass where the boot sits closest to the pipe. |
| Flame, sparks, weld spatter or molten splash | Dragon Sleeve, or FireFlex if the line also needs insulating | Dragon fibre will not burn and shrugs off sparks, but its thin wall holds little air, so it does not insulate much. FireFlex resists splash and insulates. |
All the lines compared:
| Product | What it is | Heat it handles | Continuous rating | How it fits | Best for |
|---|---|---|---|---|---|
| Techflex FireFlex fire sleeve | Thick fiberglass braid with a silicone jacket | Direct heat, open flame, oil and fuel splash | 500°F (260°C) | Slides on before the hose ends go on | Fuel, oil, brake and clutch lines near headers or turbos |
| Techflex T6 ThermaShield split tube | Aluminized fiberglass tube, split, closes with an adhesive strip | Reflects radiant heat | 491°F (255°C) material; reflects radiant heat from a 1,400°F source at 3/8" | Wraps around: no need to remove fittings | Assembled hoses and harnesses near exhaust |
| Techflex ThermaShield Convoluted | Seamless aluminized fiberglass, flexible convoluted tube | Reflects radiant heat | Not published | Slides on | Hoses and wires that bend in several directions |
| Techflex ThermaShield Flat (full adhesive) | Flat aluminized fiberglass with a full adhesive back | Reflects radiant heat | Not published | Sticks to any clean surface | Firewalls, floor pans, fuel cells, ECU boxes |
| Techflex ThermaShield Wrap (adhesive edge) | Flat aluminized fiberglass joined along one edge by adhesive | Reflects radiant heat | Not published | Wraps around odd shapes | Connectors, sensors, short runs |
| Techflex Insultherm Tru-Fit fiberglass sleeving | Acrylic-treated braided fiberglass | Direct heat, no flame or fluid seal | 464°F (240°C) | Slides on | Individual wires, thermocouple and sensor leads |
| Techflex Insultherm spark plug boot sleeves | Double-thick fiberglass sleeves, 7-1/2" long | Direct heat at the header | 1,200°F | Slips over the boot | Plug wire boots close to headers |
| Techflex header wraps: Insultherm, Header Wrap SI, Volcano Wrap | Woven tape wrapped around the pipe | Keeps heat inside the exhaust | Fiberglass 1,200°F; silica 2,000°F; basalt 1,300°F | Wrapped with 1/4" overlap, tied at the ends | Headers, down pipes, turbo crossovers |
| Techflex Dragon Sleeve | Thin double-wall braid of non-flammable Dragon fibre | Flame, sparks, weld spatter, molten splash; not an insulator | None published; the fibre decomposes at 842°F (450°C) | Slides on; the braid expands | Lines and wires exposed to sparks or open flame |
| Techflex Weld Wrap HD | Silicone-coated silica braid with hook-and-loop closure | Weld spatter, slag, sparks; heat | 500°F (260°C) continuous; 2,000°F (1,093°C) intermittent | Wraps on with hook-and-loop | Welding leads and hoses; lines that see sparks |
Frequently asked questions
With or without the inner ring?
Both are 7-1/2" long, 3/4" across and rated the same. The ring version (FCU) has an inner ring at its open end; the plain version (FCN) has none.
Can the sleeve touch the header?
Yes. The maker says that once fitted the sleeve needs no clearance from hot surfaces and can rest directly on a header.
Will it fit a right-angle boot?
Yes. At 7-1/2" it covers straight and right-angle boots.
Ratings are the maker's published figures.


