Tee, Pipe on the Side (POTS), 2x -20 AN JIC Male, 1” NPT Male
Quick Overview
- POTS tee, -20 AN JIC male and 1 inch NPT male
- Two AN on the run, NPT on the side
- Sealant on the NPT threads only
- No tape on the 37-degree flares
- E85 compatible, black anodized 6061-T6 aluminum
Show More
$85.41
per EACH (USD)Tee, Pipe on the Side (POTS), 2x -20 AN JIC Male, 1” NPT Male
A -20 AN run with a 1" NPT male branch.
The Racetronix FIT-482521 is a tee with two -20 AN JIC male ports on the run and a 1" NPT male branch on the side. Screw the branch into an NPT port, or use the run to tee a line into a port.
Key features
- 1"-11.5 NPT male on the side.
- 2x -20 AN JIC male on the run.
- E85 compatible.
- 6061-T6 aluminum, black anodized.
NPT threads are tapered and seal on the threads: use a fuel-safe thread sealant on the male NPT threads, keeping it off the first thread. Both AN ends seal metal to metal on their 37° flares; do not use tape or sealant on them.
Specifications
| Part number | FIT-482521 |
| NPT port | 1"-11.5 NPT male, on the side |
| AN ports | 2x -20 AN JIC male, 1-5/8"-12 |
| Material | 6061-T6 aluminum, black anodized |
| Fuel compatibility | Gasoline and E85 |
Lookup chart
Every part in this series. This part is highlighted. Click a column heading to sort by it; click again to reverse. On a phone, swipe the chart sideways.
| Part number | AN JIC male | NPT male |
|---|---|---|
| FIT-482503 | -3 AN | 1/8" NPT |
| FIT-482504 | -4 AN | 1/8" NPT |
| FIT-482506 | -6 AN | 1/4" NPT |
| FIT-482508 | -8 AN | 3/8" NPT |
| FIT-482510 | -10 AN | 1/2" NPT |
| FIT-482512 | -12 AN | 3/4" NPT |
| FIT-482516 | -16 AN | 1" NPT |
| FIT-482521 | -20 AN | 1" NPT |
| FIT-482520 | -20 AN | 1-1/4" NPT |
Frequently asked questions
Is it E85 compatible?
Yes. It is made from 6061-T6 aluminum and black anodized, and works with gasoline and E85.
Questions and support
Not sure which fitting your build needs? Email [email protected] before you order.
Racetronix provides technical support to verified customers through our support forum, not by phone or email. Please request forum access when you place your order so your account is approved before your parts arrive. The forum is moderated, open 24/7, and holds a knowledge base going back to 1999.









