• Your shopping cart is empty.

    To put something in your Shopping Cart, you must first browse or search for an item. When an item interests you, click the button labeled "Add to Cart", the item will be shown here.

42 lb/hr Disc High-Z Fuel Injector

$39.99

per EACH

$49.99

 per Each Honda

$180.00

 per 4 Pack

$220.00

 per 4 Pack Honda

$225.00

 per 5 Pack

$270.00

 per 6 Pack

$360.00

 per 8 Pack

$450.00

 per 10 Pack

Availability: YES

Item Code : 01D030x

Quick Overview

...

 
 
 

01D030x (Lucas old 5208009, Lucas New 621031FM, old D3181AA)

 

FLOW-MATCHED 1% INJECTORS ARE SOLD IN PACKS VIA THE 'BUY IN' DROP-DOWN MENU ABOVE.

INJECTORS SOLD AS EACH ARE NOT FLOW-MATCHED (LISTED FACTORY TOLERANCE APPLIES)

TECHNICAL INFORMATION

Dynamically flowed and grouped to within 1% tolerance using Racetronix custom injector flow bench when purchased in packs.
All tests run with n-Heptane @ 20oC (+/-1oC), 3.0 Bar (+/-0.01 Bar), 14VDC (+/-0.05VDC), saturated driver with RC cutoff.


Injector flow rates are based on testing with n-Heptane test solvent (0.6855 g/ml). U.S. EPA emission test gasoline 40CFR86.113 (0.735g/ml) flows in most common injector designs at about a 3 to 4% higher rate than n-Heptane. A ratio of 1.035:1 can be used when converting the flow specifications above.

This high-impedance injector will work with all factory ECM/PCM injector drivers.

 

TYPICAL APPLICATIONS

High-performance, replacement for:
Ford/Bosch M-9593-F302(F), M9593-F304(F)

ADDITIONAL INFORMATION

Top feed disc injectors uses multiple holes around its circumference. The disc rests on a short chimney that surrounds a metering hole. As the disc is raised off the chimney by magnetic force, fuel flows through the holes in the disc, over the walls of the chimney, and out the metering hole to form a full, finely atomized cone.

Performance advantages over pintle injectors (i.e. Ford / Bosch & Accel types) as listed by Delphi:

  • The flat mating surface ensures that no excess fuel is present to evaporate and therefore, no deposits or clogging can occur.
  • Compatible with alternative fuels (i.e. E85, Methanol) 
  • Longer service life
  • High-speed disc action allows wider dynamic flow range for improved idling
  • Quieter operation
  • Revolutionary disc design resists build up deposits which can affect fuel flow.
  • No Fuel leakage for quicker starts
  • Grease supplied to lubricate o-rings prior to installation
 

Manufacturer P/N: FJ-SM-12S
Static Flow lb/hr (n-Heptane): 42.29
Static Flow Tolerance +/-%: 4%
Dynamic Flow (mg/pulse): 9.96
Dynamic Flow Tolerance +/-%: 6%
Coil Resistance Ohms: 15.9
Coil Resistance Tolerance +/- Ohms: .35
Spray Pattern: Tri-Cone
Connector Type: Minitimer (Bosch EV1)
O-ring Type: Viton
E85 Compatible: Yes
Methanol Compatible: Yes
Weight (non-shipping): .19 lbs

Customer Reviews

This product has not been rated by any customers. Be the first person to write a review of this product.

If you own this product, please write a review for it. The Review should be helpful to other Shoppers and reflect your own experience with this product.