• Your shopping cart is empty.

    To put something in your Shopping Cart, you must first browse or search for an item. When an item interests you, click the button labeled "Add to Cart", the item will be shown here.

33 lb/hr Disc High-Z Fuel Injector

$39.99

per EACH

$45.00

 per Each Honda

Availability: YES

Item Code : 01D106X

Quick Overview

...

 
 
 

01D106x - 33 lb/hr Disc High-Z Fuel Injector ...

 

 

TECHNICAL INFORMATION


Injector flow rates are based on testing with n-Heptane test solvent (0.6855 g/ml). U.S. EPA emission test gasoline 40CFR86.113 (0.735g/ml) flows in most common injector designs at about a 3 to 4% higher rate than n-Heptane. A ratio of 1.035:1 can be used when converting the flow specifications above.

This high-impedance injector will work with all factory ECM/PCM injector drivers.

 

 

TYPICAL APPLICATIONS:

  • High-performance

ADDITIONAL INFORMATION

Top feed disc injectors uses multiple holes around its circumference. The disc rests on a short chimney that surrounds a metering hole. As the disc is raised off the chimney by magnetic force, fuel flows through the holes in the disc, over the walls of the chimney, and out the metering hole to form a full, finely atomized cone.

Performance advantages over pintle injectors (i.e. Ford / Bosch & Accel types) as listed by Delphi:

  • The flat mating surface ensures that no excess fuel is present to evaporate and therefore, no deposits or clogging can occur.
  • Compatible with alternative fuels (i.e. E85, Methanol) 
  • Longer service life
  • High-speed disc action allows wider dynamic flow range for improved idling
  • Quieter operation
  • Revolutionary disc design resists build up deposits which can affect fuel flow.
  • No Fuel leakage for quicker starts
  • Grease supplied to lubricate o-rings prior to installation
 

MPN - Manufacturer P/N: FJ-SM-41S
Static Flow lb/hr (n-Heptane): 33.3
Static Flow Tolerance +/-%: 4%
Dynamic Flow (mg/pulse): 7.56
Dynamic Flow Tolerance +/-%: 4%
Coil Resistance Ohms: 14.5
Coil Resistance Tolerance +/- Ohms: 0.35
Spray Pattern: 3-Prong Cone
Connector Type: Minitimer (Bosch EV1)
O-ring Type: Viton
E85 Compatible: Yes
Methanol Compatible: Yes
Weight (non-shipping): 0.19