95 lb/hr Import Low-Z Fuel Injector

01D145x - 95 lb/hr Low-Impedance Import Fuel Injector

These are factory new injectors. We do not offer reconditioned / used injectors.

• Low-impedance coil works with peak / hold injector drivers.
• Injectors sold in packs are dynamically flow-matched to within 1% tolerance.
• Injectors sold as each are as per factory tolerance specified.
• High-speed disc action allows wider dynamic flow range for improved idling and quieter operation
• Design resists build up deposits which can affect fuel flow and cause clogging
• No fuel leakage for quicker starts
• Longer service life
• O-ring lubricant supplied

SPECIFICATIONS:

• Static flow: 91.4 lb/hr (691 grams/min)
• Dynamic flow: 20.7 mg/pulse
• Coil resistance: 2.2 Ohms
• Spray pattern: Cone
• Connector type: Minitimer (EV1-style)
• Dynamic tollerance: +/-6%
• Time offset: 0.7ms
• Linear PW (min): 1.84ms
• Opening / Closing time: 1.07 / 0.78ms
• Peak / Hold current: 4 / 1 Amps

All tests run with n-Heptane @ 20°C (+/-1°C), 3.0 Bar (+/-0.01 Bar), 14VDC (+/-0.05VDC), saturated driver with resistive / capacitive or 70V zener cutoff. Dynamic rate @ 2.5ms @ 10ms period (100Hz)

Injector flow rates are based on testing with n-Heptane test solvent (0.6855 g/ml). U.S. EPA emission test gasoline 40CFR86.113 (0.735g/ml) flows in most common injector designs at about a 3 to 4% higher rate than n-Heptane. A ratio of 1.035:1 can be used when converting the flow specifications above.

* Advanced tuning data available in our support forum for confirmed Racetronix customers only.