• Your shopping cart is empty.

    To put something in your Shopping Cart, you must first browse or search for an item. When an item interests you, click the button labeled "Add to Cart", the item will be shown here.

65 lb/hr Delphi Low-Z Fuel Injector

Availability: NO

Item Code : 17113814

Quick Overview

...

17113814 (OE 25324744)

 

FLOW-MATCHED 1% INJECTORS ARE SOLD IN PACKS VIA THE 'BUY IN' DROP-DOWN MENU ABOVE.

INJECTORS SOLD AS EACH ARE NOT FLOW-MATCHED (LISTED FACTORY TOLERANCE APPLIES)

TECHNICAL INFORMATION

Dynamically flowed and grouped to within 1% tolerance using Racetronix custom injector flow bench when purchased in packs.
All tests run with n-Heptane @ 20oC (+/-1oC), 3.0 Bar (+/-0.01 Bar), 14VDC (+/-0.05VDC), saturated driver with RC cutoff.

Injector flow rates are based on testing with n-Heptane test solvent (0.6855 g/ml). U.S. EPA emission test gasoline 40CFR86.113 (0.735g/ml) flows in most common injector designs at about a 3 to 4% higher rate than n-Heptane. A ratio of 1.035:1 can be used when converting the flow specifications above.

This low-impedance injector is designed to work with peak and hold injector drivers typically found in aftermarket ECM/PCMs as well as dedicated injector driver modules sold by Racetronix..

TYPICAL APPLICATIONS

High-performance aftermarket

ADDITIONAL INFORMATION

  • Grease supplied to lubricate o-rings prior to installation
 

Retail P/N: 17113814
Manufacturer P/N: 17113814
Static Flow lb/hr (n-Heptane): 65.0
Static Flow cc/min: 718
Dynamic Flow Tolerance +/-%: 5%
Coil Resistance Ohms: 2
Spray Pattern: 24.4 degrees - single spray cone
Connector Type: Minitimer (Bosch EV1)
O-ring Type: Viton
Weight (non-shipping): .20 lbs
Dynamic Flow (gm/sec): 1.53

Customer Reviews

This product has not been rated by any customers. Be the first person to write a review of this product.

If you own this product, please write a review for it. The Review should be helpful to other Shoppers and reflect your own experience with this product.