• Your shopping cart is empty.

    To put something in your Shopping Cart, you must first browse or search for an item. When an item interests you, click the button labeled "Add to Cart", the item will be shown here.

4T 24" High-Temp O2 Sensor Extension

$22.50

per EACH

Availability: YES

Item Code : O2EXT-4T-24T

Quick Overview

...

 
 
 

O2EXT-4T-24T - Trapezoid 4-Position 24" HIGH TEMPERATURE

 

  • Fully Plug and Play with the factory harness and sensors
  • Mil Spec. Silver / Teflon wire (MIL-W-22759/11, -85°F To 392°F, 4 x 16 AWG wires)
  • Black fiberglass woven loom rated to 1200ºF
  • Connector locks
  • Heat shrunk loom ends (on applicable models)

The high-temperature Teflon wire and fiberglass loom allow the harness to be placed close to the exhaust manifolds without the worry of being damaged. The harness's small 1/4" outer diameter allows it to be routed in tight areas while providing increased clearance from hot or moving components (i.e. turbo systems). The loom's black outer jacket provides for a low-key appearance in your engine compartment.

Racetronix oxygen sensor extensions allow for easy relocation of oxygen sensors. This is perfect for the installation of headers which require the oxygen sensor be moved further downstream.

APPLICATIONS:

  • C5 LS2 Corvette - Heated Oxygen Sensor (HO2S) Bank 2 Sensor 1 (B2S1) Right Front
  • C5 LS2 Corvette -Heated Oxygen Sensor (HO2S) Bank 1 Sensor 1 (B1S1) Left Front
  • C6 LS3/LS7 Corvette - Heated Oxygen Sensor (HO2S) Bank 2 Sensor 1 (B2S1) Right Front
  • C6 LS3/LS7 Corvette -Heated Oxygen Sensor (HO2S) Bank 1 Sensor 1 (B1S1) Left Front
  • Camaro LS3/L99/LTT (V6) - Heated Oxygen Sensor (HO2S) Bank 2 Sensor 1 (B2S1) Right Front (LTT = L/F)
  • Camaro LS3/L99/LTT (V6) - Heated Oxygen Sensor (HO2S) Bank 1 Sensor 1 (B1S1) Left Front (LTT = R/F)

CONNECTOR DIAGRAM:

Female ConnectorMale Connector

TERMINAL DESIGNATIONS:

Terminal Function
A

HO2S Low Signal

B

HO2S High Signal

C Not used
D

Ignition Voltage

E

HO2S Heater Low Control