90° Adapter, M14x1.5 Male to -6 AN JIC Male
Quick Overview
- 90-degree adapter, M14x1.5 male to -6 AN JIC male
- Fits the GM Saginaw 14x1.5 regulator return
- Clears tight intake runners (Turbo Buick)
- Replaces Racetronix FITM-003
- E85 compatible, black anodized 6061-T6 aluminum
Show More
$14.67
per EACH (USD)90° Adapter, M14x1.5 Male to -6 AN JIC Male
Converts the GM metric Saginaw 14x1.5 mm regulator return to -6 AN, with a 90-degree turn.
The Racetronix ADF-6J901415MFF is a 90-degree adapter with an M14x1.5 metric male on one end and a -6 AN JIC male (37° flare) on the other. It is commonly used to adapt the metric Saginaw 14x1.5 mm regulator return fitting on many GM vehicles to -6 AN, and its tight bend clears the intake runners on Turbo Buicks and other cars.
It replaces Racetronix P/N FITM-003.
Key features
- M14x1.5 metric male (Saginaw return thread).
- -6 AN JIC male (37° flare).
- 90-degree body clears tight intake runners.
- E85 compatible.
- 6061-T6 aluminum, black anodized.
Racetronix regulators have an O-ring boss machined into the M14x1.5 return port. With other regulators that have an M14x1.5 Saginaw return port, additional 14 mm crush and bonded washers may be required, because those ports have no O-ring boss and must rely on a surface seal. The regulator must have a perfectly smooth sealing surface on its outer perimeter. The AN end seals metal to metal on its 37° flare, not on the threads. Do not put Teflon tape or thread sealant on it.
Specifications
| Part number | ADF-6J901415MFF |
| Metric end | M14x1.5 male |
| JIC end | -6 AN JIC male, 9/16"-18 thread, 37° flare |
| Body | 90-degree elbow |
| Replaces | Racetronix P/N FITM-003 |
| Material | 6061-T6 aluminum, black anodized |
| Fuel compatibility | Gasoline and E85 |
Related adapters
Straight versions: AN JIC Male to Metric Male Adapters.
Cross-reference: other brands
Shopping for another brand? The ADF-6J901415MFF replaces or compares with these parts. "Equivalent" means the same ends, thread sizes and construction (colour aside). "Similar" means a close match that differs in a detail, such as material (steel instead of aluminum), a gauge port or body length.
| Brand | Part number | Match |
|---|---|---|
| Fragola | 499214-BL | Similar |
About this cross-reference. We compiled these equivalent part numbers from the manufacturers’ published catalogs and websites, and we update them when we can. We have not fitted or tested other brands’ parts with ours. Check the specifications, drawing and lookup chart on this page against your application before you order. Final fitment is the buyer’s responsibility. Brand names and part numbers belong to their owners and are used for reference only; Racetronix is not affiliated with these companies.
Frequently asked questions
Will it seal on a regulator without an O-ring boss port?
Yes, if you add 14 mm crush and bonded washers and the regulator has a smooth, flat sealing surface around the port.
Is it E85 compatible?
Yes. It is made from 6061-T6 aluminum and black anodized, and works with gasoline and E85.
Questions and support
Not sure which fitting your build needs? Email [email protected] before you order.
Racetronix provides technical support to verified customers through our support forum, not by phone or email. Please request forum access when you place your order so your account is approved before your parts arrive. The forum is moderated, open 24/7, and holds a knowledge base going back to 1999.








