Adapter, -10 AN JIC Male to 1/2” BSPP Female
Quick Overview
- Adapter, -10 AN JIC male to 1/2 inch BSPP female
- Fits 1/2 inch BSPP male parts to AN hose
- BSPP seals on a bonded washer or O-ring
- No tape on the 37-degree flare end
- E85 compatible, black anodized 6061-T6 aluminum
Show More
$14.20
per EACH (USD)Adapter, -10 AN JIC Male to 1/2” BSPP Female
Connects -10 AN plumbing to a 1/2" BSPP male fitting.
The Racetronix ADF-10J12BF has a -10 AN JIC male (37° flare) on one end and a 1/2"-14 BSPP (British Standard Pipe, parallel) female port on the other. Use it to fit a 1/2" BSPP male part, common on European and Asian pumps, filters and coolers, to -10 AN hose.
Key features
- -10 AN JIC male (37° flare).
- 1/2"-14 BSPP female (parallel thread).
- Straight one-piece body.
- E85 compatible.
- 6061-T6 aluminum, black anodized.
The AN end seals metal to metal on its 37° flare, not on the threads. Do not put Teflon tape or thread sealant on it. BSPP is a parallel thread and does not seal on its threads either: the 1/2" BSPP male part seals with a bonded (Dowty) washer or O-ring against the flat end face of this fitting. Do not use a tapered (BSPT) male part.
Specifications
| Part number | ADF-10J12BF |
| JIC end | -10 AN JIC male, 7/8"-14 thread, 37° flare |
| BSPP end | 1/2"-14 BSPP female, parallel |
| Female thread depth | 20.50 mm |
| Hex | 25.40 mm (1") |
| Overall length | 44.40 mm (reference) |
| Material | 6061-T6 aluminum, black anodized |
| Fuel compatibility | Gasoline and E85 |
Lookup chart
Every part in this series. This part is highlighted. Click a column heading to sort by it; click again to reverse. On a phone, swipe the chart sideways.
| Part number | AN JIC male | BSPP female | Length (mm) | Hex (mm) |
|---|---|---|---|---|
| ADF-8J12BF | -8 AN | 1/2"-14 BSPP | 41.85 | 25.40 |
| ADF-10J12BF | -10 AN | 1/2"-14 BSPP | 44.40 | 25.40 |
| ADF-12J12BF | -12 AN | 1/2"-14 BSPP | — | — |
Frequently asked questions
Will an NPT fitting thread into the BSPP end?
No. BSP and NPT threads have different thread angles (55° and 60°). They may start but will not seal. Use a 1/2" BSPP male part.
How does the BSPP end seal?
On a bonded (Dowty) washer or O-ring between the male part and the flat end face of this fitting. Do not rely on tape or sealant on the threads.
Is it E85 compatible?
Yes. It is made from 6061-T6 aluminum and black anodized, and works with gasoline and E85.
Questions and support
Not sure which fitting your build needs? Email [email protected] before you order.
Racetronix provides technical support to verified customers through our support forum, not by phone or email. Please request forum access when you place your order so your account is approved before your parts arrive. The forum is moderated, open 24/7, and holds a knowledge base going back to 1999.









