Welcome to Racetronix
Welcome to Racetronix  |  All prices indicated are in USD($)  905-477-7014  |   Help   |  Catalogs  |  About Us

Adapter, -12 AN JIC Male to 1/2” BSPP Female

Quick Overview

  • Adapter, -12 AN JIC male to 1/2 inch BSPP female
  • Fits 1/2 inch BSPP male parts to AN hose
  • BSPP seals on a bonded washer or O-ring
  • No tape on the 37-degree flare end
  • E85 compatible, black anodized 6061-T6 aluminum

Show More
Item #: ADF-12J12BF

$14.20

per EACH (USD)
This is an obsolete Item
 
 
 In Stock & Ready to Ship

Adapter, -12 AN JIC Male to 1/2” BSPP Female

Connects -12 AN plumbing to a 1/2" BSPP male fitting.

The Racetronix ADF-12J12BF has a -12 AN JIC male (37° flare) on one end and a 1/2"-14 BSPP (British Standard Pipe, parallel) female port on the other. Use it to fit a 1/2" BSPP male part, common on European and Asian pumps, filters and coolers, to -12 AN hose.

Key features

  • -12 AN JIC male (37° flare).
  • 1/2"-14 BSPP female (parallel thread).
  • Straight one-piece body.
  • E85 compatible.
  • 6061-T6 aluminum, black anodized.
Sealing

The AN end seals metal to metal on its 37° flare, not on the threads. Do not put Teflon tape or thread sealant on it. BSPP is a parallel thread and does not seal on its threads either: the 1/2" BSPP male part seals with a bonded (Dowty) washer or O-ring against the flat end face of this fitting. Do not use a tapered (BSPT) male part.

Specifications

Part numberADF-12J12BF
JIC end-12 AN JIC male, 1-1/16"-12 thread, 37° flare
BSPP end1/2"-14 BSPP female, parallel
Material6061-T6 aluminum, black anodized
Fuel compatibilityGasoline and E85

Lookup chart

Every part in this series. This part is highlighted. Click a column heading to sort by it; click again to reverse. On a phone, swipe the chart sideways.

Part numberAN JIC maleBSPP femaleLength (mm)Hex (mm)
ADF-8J12BF-8 AN1/2"-14 BSPP41.8525.40
ADF-10J12BF-10 AN1/2"-14 BSPP44.4025.40
ADF-12J12BF-12 AN1/2"-14 BSPP——

Frequently asked questions

Will an NPT fitting thread into the BSPP end?

No. BSP and NPT threads have different thread angles (55° and 60°). They may start but will not seal. Use a 1/2" BSPP male part.

How does the BSPP end seal?

On a bonded (Dowty) washer or O-ring between the male part and the flat end face of this fitting. Do not rely on tape or sealant on the threads.

Is it E85 compatible?

Yes. It is made from 6061-T6 aluminum and black anodized, and works with gasoline and E85.

Questions and support

Not sure which fitting your build needs? Email [email protected] before you order.

Racetronix provides technical support to verified customers through our support forum, not by phone or email. Please request forum access when you place your order so your account is approved before your parts arrive. The forum is moderated, open 24/7, and holds a knowledge base going back to 1999.

© 2026 Racetronix. All rights reserved. | Part No: ADF-12J12BF | Revision: Bravo