Adapter, -10AN Male » 3/4-14 BSPP Male
Quick Overview
- Adapter, -10 AN JIC male to 3/4 inch BSPP male
- Fits 3/4 inch BSPP ports to AN hose
- BSPP end seals on a bonded washer or O-ring
- No tape on the 37-degree flare end
- E85 compatible, black anodized 6061-T6 aluminum
Show More
$4.64
per EACH (USD)Adapter, -10 AN JIC Male to 3/4"-14 BSPP Male, Black
Connects -10 AN plumbing to a 3/4" BSPP port.
The Racetronix ADF-10J3414B has a -10 AN JIC male (37° flare) on one end and a 3/4" BSPP (British Standard Pipe, parallel) male thread on the other. Screw the BSPP end into a 3/4" BSPP port, common on European and Asian pumps, filters, coolers and sensors, and connect a -10 AN female hose end or swivel to the JIC end.
Key features
- -10 AN JIC male (37° flare).
- 3/4"-14 BSPP male (parallel British Standard Pipe).
- Straight one-piece body.
- E85 compatible.
- 6061-T6 aluminum, black anodized.
The AN end seals metal to metal on its 37° flare, not on the threads. Do not put Teflon tape or thread sealant on it. The BSPP end is a parallel thread and does not seal on its threads either: it seals on a bonded (Dowty) washer or O-ring against the port face.
Specifications
| Part number | ADF-10J3414B |
| JIC end | -10 AN JIC male, 7/8"-14 thread, 37° flare |
| BSPP end | 3/4" BSPP male, 14 threads per inch, parallel |
| Material | 6061-T6 aluminum, black anodized |
| Fuel compatibility | Gasoline and E85 |
Lookup chart
Every part in this series. This part is highlighted. Click a column heading to sort by it; click again to reverse. On a phone, swipe the chart sideways.
| Part number | AN JIC male | BSPP male |
|---|---|---|
| ADF-4J1828B | -4 AN | 1/8"-28 BSPP |
| ADF-6J1828B | -6 AN | 1/8"-28 BSPP |
| ADF-6J1419B | -6 AN | 1/4"-19 BSPP |
| ADF-6J3819B | -6 AN | 3/8"-19 BSPP |
| ADF-6J1214B | -6 AN | 1/2"-14 BSPP |
| ADF-8J1419B | -8 AN | 1/4"-19 BSPP |
| ADF-8J3819B | -8 AN | 3/8"-19 BSPP |
| ADF-8J1214B | -8 AN | 1/2"-14 BSPP |
| ADF-10J3819B | -10 AN | 3/8"-19 BSPP |
| ADF-10J1214B | -10 AN | 1/2"-14 BSPP |
| ADF-10J3414B | -10 AN | 3/4"-14 BSPP |
| ADF-12J1214B | -12 AN | 1/2"-14 BSPP |
Frequently asked questions
Is BSP the same as NPT?
No. BSP threads have a 55° thread angle and NPT threads 60°, and the pitch differs in some sizes. A BSP fitting may start in an NPT port but it will not seal. Check that your port is BSP before ordering.
Can I use it in a BSPT (tapered) port?
It is not recommended. A parallel thread in a tapered port only engages a few threads and cannot seal on a washer. Use the BSPT version for a tapered port.
Is it E85 compatible?
Yes. It is made from 6061-T6 aluminum and black anodized, and works with gasoline and E85.
Questions and support
Not sure which fitting your build needs? Email [email protected] before you order.
Racetronix provides technical support to verified customers through our support forum, not by phone or email. Please request forum access when you place your order so your account is approved before your parts arrive. The forum is moderated, open 24/7, and holds a knowledge base going back to 1999.
