Adapter, -16AN Male » 22x1.5mm Male, BLK
Quick Overview
- Adapter, M22x1.5 male to -16 AN JIC male
- Metric ORB end with O-ring fitted
- Straight one-piece body
- No tape on the 37-degree flare end
- E85 compatible, black anodized 6061-T6 aluminum
Show More
$14.24
per EACH (USD)Adapter, -16 AN JIC Male to M22x1.5 Metric ORB Male, Black
Converts an M22x1.5 oil cooler or sandwich-plate port to -16 AN.
The Racetronix ADF-16J2215MR has an M22x1.5 metric O-ring boss (ORB) male on one end and a -16 AN JIC male (37° flare) on the other. M22x1.5 is a common thread on oil coolers, oil filter sandwich plates and remote filter mounts. Screw the metric end into the port and connect a -16 AN female hose end or swivel to the JIC end.
Key features
- M22x1.5 metric ORB male with FKM (Viton) O-ring fitted.
- -16 AN JIC male (37° flare).
- Straight one-piece body.
- E85 compatible.
- 6061-T6 aluminum, black anodized.
The AN end seals metal to metal on its 37° flare, not on the threads. Do not put Teflon tape or thread sealant on it. The M22x1.5 end is a metric O-ring boss: its O-ring seals against the port face, not on the threads.
Specifications
| Part number | ADF-16J2215MR |
| Metric end | M22x1.5 metric ORB male, FKM (Viton) O-ring fitted |
| JIC end | -16 AN JIC male, 1-5/16"-12 thread, 37° flare |
| Body | Straight |
| Material | 6061-T6 aluminum, black anodized |
| Fuel compatibility | Gasoline and E85 |
Lookup chart
Every part in this series. This part is highlighted. Click a column heading to sort by it; click again to reverse. On a phone, swipe the chart sideways.
| Part number | AN JIC male | Body |
|---|---|---|
| ADF-4J2215MR | -4 AN | Straight |
| ADF-6J2215MR | -6 AN | Straight |
| ADF-8J2215MR | -8 AN | Straight |
| ADF-10J2215MR | -10 AN | Straight |
| ADF-12J2215MR | -12 AN | Straight |
| ADF-16J2215MR | -16 AN | Straight |
| ADF-6J90M2215 | -6 AN | 90° |
| ADF-8J90M2215 | -8 AN | 90° |
| ADF-10J90M2215 | -10 AN | 90° |
| ADF-12J90M2215 | -12 AN | 90° |
Frequently asked questions
What is M22x1.5 used on?
It is a common port thread on oil coolers, oil filter sandwich plates and remote filter mounts. Measure the thread (22 mm diameter, 1.5 mm pitch) before ordering.
Do I need thread sealant or tape?
No. The O-ring on the metric end and the 37° flare on the AN end do the sealing. Tape can stop them from seating, and pieces of tape can get into the oil system.
Is it E85 compatible?
Yes. It is made from 6061-T6 aluminum and black anodized, and works with gasoline and E85.
Questions and support
Not sure which fitting your build needs? Email [email protected] before you order.
Racetronix provides technical support to verified customers through our support forum, not by phone or email. Please request forum access when you place your order so your account is approved before your parts arrive. The forum is moderated, open 24/7, and holds a knowledge base going back to 1999.
