Welcome to Racetronix
Welcome to Racetronix  |  All prices indicated are in USD($)  905-477-7014  |   Help   |  Catalogs  |  About Us

Adapter, -4 AN JIC Male to 1/8” NPT Male w/ 1/8” NPT Female Side Port

Quick Overview

  • Adapter, -4 AN JIC male to 1/8 inch NPT male
  • 1/8 inch NPT side port for gauge or sensor
  • Sealant on NPT threads only, not the flare
  • No tape on the 37-degree flare end
  • E85 compatible, black anodized 6061-T6 aluminum

Show More
Item #: ADF-481604P

$7.04

per EACH (USD)
This is an obsolete Item
 
 
 In Stock & Ready to Ship

Adapter, -4 AN JIC Male to 1/8” NPT Male w/ 1/8” NPT Female Side Port

Connects a 1/8" NPT port to -4 AN plumbing.

The Racetronix ADF-481604P is a straight adapter with a 1/8" NPT male (tapered pipe thread) on one end and a -4 AN JIC male (37° flare) on the other. Screw the NPT end into a 1/8" NPT port on a pump, filter, regulator, gauge, sensor or block, and connect a -4 AN female hose end or swivel to the JIC end. A 1/8" NPT female side port lets you add a pressure gauge or sensor without another tee fitting.

Key features

  • 1/8"-27 NPT male (tapered pipe thread).
  • -4 AN JIC male (37° flare).
  • 1/8" NPT female side port for a gauge or sensor.
  • E85 compatible.
  • 6061-T6 aluminum, black anodized.
Sealing

The NPT end is a tapered pipe thread and seals on its threads: use a fuel-safe thread sealant (PTFE paste) on the NPT threads only, and keep it off the first thread so none gets into the system. The AN end seals metal to metal on its 37° flare, not on the threads. Do not put Teflon tape or thread sealant on it. Use thread sealant on whatever you fit into the 1/8" NPT side port as well.

Specifications

Part numberADF-481604P
NPT end1/8"-27 NPT male, tapered
JIC end-4 AN JIC male, 7/16"-20 thread, 37° flare
Side port1/8"-27 NPT female
BodyStraight
Material6061-T6 aluminum, black anodized
Fuel compatibilityGasoline and E85

Lookup chart: AN JIC male to NPT male adapters

Every Racetronix AN JIC male to NPT male adapter, by size and shape: straight, 45°, 90°, 90° swivel and straight with a 1/8" NPT gauge port. This part is highlighted. Click a column heading to sort by it; click again to reverse. On a phone, swipe the chart sideways.

Frequently asked questions

Do I need thread sealant?

On the NPT threads, yes: NPT is a tapered thread that seals on the threads, so use a fuel-safe sealant such as PTFE paste. Never put sealant or tape on the 37° flare end; it seals metal to metal.

Will it fit a BSP port?

No. NPT and BSP threads have different thread angles and, in some sizes, different pitches. Check that your port is NPT before ordering.

Is it E85 compatible?

Yes. It is made from 6061-T6 aluminum and black anodized, and works with gasoline and E85.

Questions and support

Not sure which fitting your build needs? Email [email protected] before you order.

Racetronix provides technical support to verified customers through our support forum, not by phone or email. Please request forum access when you place your order so your account is approved before your parts arrive. The forum is moderated, open 24/7, and holds a knowledge base going back to 1999.

© 2026 Racetronix. All rights reserved. | Part No: ADF-481604P | Revision: Alpha