Adapter, -8AN JICM » 1/4-19 BSPT Male
Quick Overview
- Adapter, -8 AN JIC male to 1/4 inch BSPT male
- Fits 1/4 inch BSPT ports to AN hose
- BSPT end seals on the threads with sealant
- No tape on the 37-degree flare end
- E85 compatible, black anodized 6061-T6 aluminum
Show More
$5.21
per EACH (USD)Adapter, -8 AN JIC Male to 1/4"-19 BSPT Male, Black
Connects -8 AN plumbing to a 1/4" BSPT port.
The Racetronix ADF-8J14PTM has a -8 AN JIC male (37° flare) on one end and a 1/4" BSPT (British Standard Pipe, tapered) male thread on the other. Screw the BSPT end into a 1/4" BSPT port, common on European and Asian pumps, filters, coolers and sensors, and connect a -8 AN female hose end or swivel to the JIC end.
Key features
- -8 AN JIC male (37° flare).
- 1/4"-19 BSPT male (tapered British Standard Pipe).
- Straight one-piece body.
- E85 compatible.
- 6061-T6 aluminum, black anodized.
The AN end seals metal to metal on its 37° flare, not on the threads. Do not put Teflon tape or thread sealant on it. The BSPT end is a tapered pipe thread and seals on the threads: use a fuel-safe thread sealant on it, and keep sealant off the first thread.
Specifications
| Part number | ADF-8J14PTM |
| JIC end | -8 AN JIC male, 3/4"-16 thread, 37° flare |
| BSPT end | 1/4" BSPT male, 19 threads per inch, tapered |
| Material | 6061-T6 aluminum, black anodized |
| Fuel compatibility | Gasoline and E85 |
Lookup chart
Every part in this series. This part is highlighted. Click a column heading to sort by it; click again to reverse. On a phone, swipe the chart sideways.
| Part number | AN JIC male | BSPT male |
|---|---|---|
| ADF-3J18PTM | -3 AN | 1/8"-28 BSPT |
| ADF-4J18PTM | -4 AN | 1/8"-28 BSPT |
| ADF-4J1429PTM | -4 AN | 1/4"-19 BSPT |
| ADF-6J18PTM | -6 AN | 1/8"-28 BSPT |
| ADF-6J14PTM | -6 AN | 1/4"-19 BSPT |
| ADF-6J38PTM | -6 AN | 3/8"-19 BSPT |
| ADF-8J14PTM | -8 AN | 1/4"-19 BSPT |
| ADF-8J38PTM | -8 AN | 3/8"-19 BSPT |
| ADF-8J12PTM | -8 AN | 1/2"-14 BSPT |
| ADF-10J12PTM | -10 AN | 1/2"-14 BSPT |
| ADF-10J34PTM | -10 AN | 3/4"-14 BSPT |
| ADF-12J1PTM | -12 AN | 1"-11 BSPT |
Frequently asked questions
Is BSP the same as NPT?
No. BSP threads have a 55° thread angle and NPT threads 60°, and the pitch differs in some sizes. A BSP fitting may start in an NPT port but it will not seal. Check that your port is BSP before ordering.
Can I use it in a BSPP (parallel) port?
No. A tapered thread will not seal in a parallel port. Use the BSPP version, which seals on a washer.
Is it E85 compatible?
Yes. It is made from 6061-T6 aluminum and black anodized, and works with gasoline and E85.
Questions and support
Not sure which fitting your build needs? Email [email protected] before you order.
Racetronix provides technical support to verified customers through our support forum, not by phone or email. Please request forum access when you place your order so your account is approved before your parts arrive. The forum is moderated, open 24/7, and holds a knowledge base going back to 1999.
