Boost/Vacuum Manifold Block, Inline, 12 x 1/8” NPT + 2 x 3/8” NPT, Black
Quick Overview
- Billet boost/vacuum manifold block, inline
- 2 x 3/8" NPT ends, 12 x 1/8" NPT ports
- One hub for every boost and vacuum line
- 160 x 40 x 24 mm, two mounting holes
- 6061 aluminum, black anodized
Show More
$81.97
per EACH (USD)Boost/Vacuum Manifold Block, Inline, 12 x 1/8" NPT + 2 x 3/8" NPT, Black
Billet aluminum distribution block: two 3/8" NPT end ports and twelve 1/8" NPT ports on three faces. One clean hub for boost and vacuum references.
The Racetronix VBLOCK-X10L replaces a tangle of vacuum tees with one billet block. Feed it from the intake manifold through a 3/8" NPT end port and run each boost or vacuum reference (wastegates, blow-off valves, boost controller, MAP sensor, fuel pressure regulator, gauges) from its own 1/8" NPT port. The second 3/8" end port can be a second feed or a plug.
Key features
- 14 ports in all: two 3/8" NPT ends and twelve 1/8" NPT ports on three faces.
- One clean reference hub for wastegates, blow-off valves, boost controller, MAP sensor, regulator and gauges.
- Billet 6061 aluminum, black anodized.
- Bolts down flat with two counterbored holes 146 mm apart.
- Compact: 160 x 40 x 24 mm.
Ports
| Port | Thread | Qty | Use |
|---|---|---|---|
| Ends | 3/8" NPT female (3/8"-18) | 2 | Main feed from the manifold; second feed or plug |
| Top | 1/8" NPT female (1/8"-27) | 4 | One row of four |
| Each long side | 1/8" NPT female (1/8"-27) | 4 + 4 | One row of four on each side |
Optional plugs, hose barbs and adapters
The block comes with no fittings. Plugs, hose barbs, adapters, Hobbs pressure switches and gauges shown in any port in the photos are optional and sold separately. Choose what you need from the chart below.
Racetronix plugs and fittings that fit the 1/8" and 3/8" NPT ports. Seal all NPT threads with a thread sealant suited to air, fuel and oil vapour.
Specifications
| Part number | VBLOCK-X10L |
| Type | Boost/vacuum block |
| Material | 6061 aluminum, black anodized, laser-engraved logo |
| Size | 160 x 40 x 24 mm (6.30 x 1.57 x 0.94") |
| Mounting | Two 5.0 mm holes, 146 mm (5.75") apart, counterbored 9.5 mm for socket-head screws |
Manifold and cube chart: the full range
Every manifold, cube and block in this range. Click a column heading to sort.
| Part | Type | Ports | Material |
|---|---|---|---|
| VBLOCK-GRD4XS | Guard | Guard for VBLOCK-X13S | 6061-T6 aluminum |
| VBLOCK-X10L | Boost/vacuum block | 2 x 3/8" NPT female (3/8"-18), 4 x 1/8" NPT female (1/8"-27), 4 + 4 x 1/8" NPT female (1/8"-27) | 6061 aluminum |
| VBLOCK-X13S | Boost/vacuum block | 2 x 3/8" NPT female (3/8"-18), 4 x 1/8" NPT female (1/8"-27), 8 x 1/8" NPT female (1/8"-27) | 6061 aluminum |
| VBLOCK-X13SK1 | Boost/vacuum block kit | Kit: block, guard, gauge, 11 plugs | 6061 aluminum block and 6061-T6 aluminum guard |
Frequently asked questions
What fittings do I need?
1/8" NPT to barb or 1/8" NPT to -3/-4 AN fittings for the small ports, and a 3/8" NPT fitting for the main feed. Plug unused ports with 1/8" NPT plugs.
Where should the main feed come from?
From a manifold port below the throttle body (after the throttle) so every line sees both boost and vacuum. Use the largest feed you can: all the references share it.
Questions and support
Questions before you order? Email [email protected].
Racetronix provides technical support to verified customers through our support forum, not by phone or email. Please request forum access when you place your order so your account is approved before your parts arrive. The forum is moderated, open 24/7, and holds a knowledge base going back to 1999.














































