Boost/Vacuum Manifold Block, Square, 12 x 1/8” NPT + 2 x 3/8” NPT, Black
Quick Overview
- Square billet boost/vacuum manifold block
- 2 x 3/8" NPT, 12 x 1/8" NPT ports
- For multi-pump kits: all Hobbs switches in one place
- Block only; VBLOCK-GRD4XS guard sold separately
- 6061 aluminum, black anodized
Show More
$97.37
per EACH (USD)Boost/Vacuum Manifold Block, Square, 12 x 1/8" NPT + 2 x 3/8" NPT, Black
Square billet aluminum distribution block: two 3/8" NPT ports and twelve 1/8" NPT ports on the top and four sides. Block only: the VBLOCK-GRD4XS guard, pressure switches and gauge are sold separately.

Shown with the VBLOCK-GRD4XS guard, pressure switches, a gauge and fittings. Only the block is included; everything else is sold separately.
The Racetronix VBLOCK-X13S is the square version of our boost/vacuum manifold block. It was designed for our multi-pump fuel pump hanger and module kits: one block gives a single boost/vacuum reference for every Hobbs pressure switch and the boost/fuel pressure gauge, all in one place. On a triple or quad pump kit, the pressure switches and the gauge screw into the four top ports, and the optional VBLOCK-GRD4XS guard (sold separately) bolts over them to protect them. The side ports take the feed from the intake manifold, a pressure transducer, another pressure switch to control something else, or any other boost or vacuum line.
Key features
- One boost/vacuum source for a multi-pump kit: every Hobbs pressure switch and the gauge in one place.
- 14 ports in all: two 3/8" NPT and twelve 1/8" NPT on the top and four sides.
- Four top ports laid out for pressure switches or a gauge; the VBLOCK-GRD4XS guard (sold separately) bolts over them.
- Side ports for the manifold feed, a pressure transducer or extra switches.
- Billet 6061 aluminum, black anodized.
- Two mounting tabs; 95 mm square body.
Ports
| Port | Thread | Qty | Use |
|---|---|---|---|
| Two sides | 3/8" NPT female (3/8"-18) | 2 | Main feed; second feed or plug |
| Top | 1/8" NPT female (1/8"-27) | 4 | Pressure sensors (guard fits over these) |
| Sides | 1/8" NPT female (1/8"-27) | 8 | Two per side: one per boost or vacuum line |
Optional plugs, hose barbs and adapters
The block comes with no fittings. Plugs, hose barbs, adapters, Hobbs pressure switches and gauges shown in any port in the photos are optional and sold separately, as is the VBLOCK-GRD4XS guard. Choose what you need from the chart below.
Racetronix plugs and fittings that fit the 1/8" and 3/8" NPT ports. Seal all NPT threads with a thread sealant suited to air, fuel and oil vapour.
Specifications
| Part number | VBLOCK-X13S |
| Type | Boost/vacuum block |
| Material | 6061 aluminum, black anodized, laser-engraved logo |
| Size | 95 mm (3.74") square x 24 mm (0.94") thick; tab holes 108 mm (4.25") apart |
| Mounting | Two tabs with 5.0 mm holes, 108 mm (4.25") centre to centre |
| Guard mounting | Two M4 x 0.7 threaded holes in the top for VBLOCK-GRD4XS |
Manifold and cube chart: the full range
Every manifold, cube and block in this range. Click a column heading to sort.
| Part | Type | Ports | Material |
|---|---|---|---|
| VBLOCK-GRD4XS | Guard | Guard for VBLOCK-X13S | 6061-T6 aluminum |
| VBLOCK-X10L | Boost/vacuum block | 2 x 3/8" NPT female (3/8"-18), 4 x 1/8" NPT female (1/8"-27), 4 + 4 x 1/8" NPT female (1/8"-27) | 6061 aluminum |
| VBLOCK-X13S | Boost/vacuum block | 2 x 3/8" NPT female (3/8"-18), 4 x 1/8" NPT female (1/8"-27), 8 x 1/8" NPT female (1/8"-27) | 6061 aluminum |
| VBLOCK-X13SK1 | Boost/vacuum block kit | Kit: block, guard, gauge, 11 plugs | 6061 aluminum block and 6061-T6 aluminum guard |
Frequently asked questions
What is included?
The VBLOCK-X13S block only. The VBLOCK-GRD4XS guard, pressure switches, gauge and fittings are sold separately. Some photos show the block with the guard and switches fitted to show how it is used.
Which kits is it for?
It was designed for our multi-pump fuel pump hanger and module kits. A dual pump kit needs only one pressure switch, so the block is most useful on triple and quad kits, where it holds all the Hobbs pressure switches and the gauge on one boost/vacuum reference.
Can I use it for other sensors?
Yes. Any 1/8" NPT port can take a pressure transducer, another pressure switch to control something else, or a boost or vacuum line.
What fittings do I need?
1/8" NPT to barb or 1/8" NPT to -3/-4 AN fittings for the small ports, and a 3/8" NPT fitting for the main feed. Plug unused ports with 1/8" NPT plugs.
Questions and support
Questions before you order? Email [email protected].
Racetronix provides technical support to verified customers through our support forum, not by phone or email. Please request forum access when you place your order so your account is approved before your parts arrive. The forum is moderated, open 24/7, and holds a knowledge base going back to 1999.
































