Dual Hose Separator, 5/8"+11/16", BLACK
Quick Overview
- Billet dual hose separator
- Bores 5/8" (15.9 mm) + 11/16" (17.5 mm)
- Holds two hoses or lines side by side
- Black anodized aluminum, stainless screw
- Optional FRS-0375X025 foam strip liner
Show More
$5.61
per EACH (USD)Billet Dual Hose Separator, 5/8" + 11/16" ID, Black
Holds two hoses or lines side by side: one of 5/8" and one of 11/16" outside diameter.
The Racetronix DHS-1011 is a two-piece billet separator in black-anodized aluminum. It clamps two hoses or lines in parallel, keeps them evenly spaced and stops them rubbing on each other, with a single stainless Allen-head screw through the centre. Bores: 5/8" (15.9 mm) + 11/16" (17.5 mm).
Key features
- Bores: 5/8" (15.9 mm) + 11/16" (17.5 mm). Sized to the separator, not to the hose's AN size.
- Two-piece billet aluminum, black anodized.
- Stainless Allen-head screw through the centre clamps both halves together.
- Keeps parallel hoses and lines neat, evenly spaced and from chafing each other.
- Between sizes? Choose the next size up and line the bores with FRS-0375X025 foam strip to take up the slack.
Choosing the size
Measure the outside diameter of each hose or line and match it to the bore. Hose of the same AN size can differ in outside diameter between types and brands, so do not go by the AN size alone. For two different hoses, use a mixed-bore separator such as DHS-0810 or DHS-1011.
If there is no exact match, choose the next size up and line the bore with FRS-0375X025 adhesive foam rubber strip to take up the extra space.
Hose cross-reference
This separator suits: -8 Stainless braided / nylon covered rubber hose (RBSH / RBNH); -10 PTFE hose, nylon over-braid (TFT1168); -10 Aluminum hard line (ALTUBE-10), 5/8".
| Hose or line | Size | Outside diameter | Dual hose separator |
|---|---|---|---|
| Stainless braided / nylon covered rubber hose (RBSH / RBNH) | -4 | 11.2 mm (0.441") | DHS-08 (1/2") with FRS-0375X025 foam strip |
| Stainless braided / nylon covered rubber hose (RBSH / RBNH) | -6 | 14.2 mm (0.559") | DHS-09 (9/16") (close fit) |
| Stainless braided / nylon covered rubber hose (RBSH / RBNH) | -8 | 17.1 mm (0.673") | DHS-11 (11/16") (close fit) |
| Stainless braided / nylon covered rubber hose (RBSH / RBNH) | -10 | 20.8 mm (0.819") | DHS-14 (7/8") with FRS-0375X025 foam strip |
| Stainless braided / nylon covered rubber hose (RBSH / RBNH) | -12 | 24.4 mm (0.961") | DHS-16 (1") with FRS-0375X025 foam strip |
| Stainless braided / nylon covered rubber hose (RBSH / RBNH) | -16 | 30.5 mm (1.201") | Larger than our largest separator |
| Stainless braided / nylon covered rubber hose (RBSH / RBNH) | -20 | 35.8 mm (1.409") | Larger than our largest separator |
| PTFE hose, bare stainless braid (TFT1170 / TFT1167) | -3 | 6.4 mm (0.252") | DHS-05 (5/16") with FRS-0375X025 foam strip |
| PTFE hose, bare stainless braid (TFT1170 / TFT1167) | -4 | 7.9 mm (0.311") | DHS-05 (5/16") (close fit) |
| PTFE hose, bare stainless braid (TFT1170 / TFT1167) | -6 | 11.3 mm (0.445") | DHS-08 (1/2") with FRS-0375X025 foam strip |
| PTFE hose, bare stainless braid (TFT1170 / TFT1167) | -8 | 13.9 mm (0.547") | DHS-09 (9/16") (close fit) |
| PTFE hose, bare stainless braid (TFT1170 / TFT1167) | -10 | 16.5 mm (0.650") | DHS-22 (21/32") (close fit) |
| PTFE hose, bare stainless braid (TFT1170 / TFT1167) | -12 | 19.7 mm (0.776") | DHS-13 (13/16") with FRS-0375X025 foam strip |
| PTFE hose, bare stainless braid (TFT1170 / TFT1167) | -16 | 26.2 mm (1.031") | DHS-17 (1-1/16") with FRS-0375X025 foam strip |
| PTFE hose, nylon over-braid (TFT1168) | -3 | 6.4 mm (0.252") | DHS-05 (5/16") with FRS-0375X025 foam strip |
| PTFE hose, nylon over-braid (TFT1168) | -4 | 7.9 mm (0.311") | DHS-05 (5/16") (close fit) |
| PTFE hose, nylon over-braid (TFT1168) | -6 | 10.7 mm (0.421") | DHS-07 (7/16") (close fit) |
| PTFE hose, nylon over-braid (TFT1168) | -8 | 13.9 mm (0.547") | DHS-09 (9/16") (close fit) |
| PTFE hose, nylon over-braid (TFT1168) | -10 | 15.9 mm (0.626") | DHS-10 (5/8") (close fit) |
| PTFE hose, nylon over-braid (TFT1168) | -12 | 19.5 mm (0.768") | DHS-13 (13/16") with FRS-0375X025 foam strip |
| Aluminum hard line (ALTUBE-04), 1/4" | -4 | 6.35 mm (0.250") | DHS-04 (1/4") (close fit) |
| Aluminum hard line (ALTUBE-05), 5/16" | -5 | 7.94 mm (0.313") | DHS-05 (5/16") (close fit) |
| Aluminum hard line (ALTUBE-06), 3/8" | -6 | 9.53 mm (0.375") | DHS-06 (3/8") (close fit) |
| Aluminum hard line (ALTUBE-08), 1/2" | -8 | 12.7 mm (0.500") | DHS-08 (1/2") (close fit) |
| Aluminum hard line (ALTUBE-10), 5/8" | -10 | 15.88 mm (0.625") | DHS-10 (5/8") (close fit) |
Hose outside diameters are nominal: PTFE values are for the bare stainless braid (or the over-braided TFT1168); hoses with a black jacket or PVC coating are larger. Always measure your own hose before choosing a clamp. Hard line: choose the bore equal to the line's outside diameter.
How to install
- If you are using foam strip, cut it to length and stick it inside the bores.
- Place the hoses in one half, fit the other half over them and fit the centre screw.
- Tighten until the hoses are held firmly without being crushed.
Dual hose separator chart: all sizes
| Part | Bore 1 (in) | Bore 2 (in) | Bore 1 (mm) | Bore 2 (mm) |
|---|---|---|---|---|
| DHS-03 | 3/16" | 3/16" | 4.8 | 4.8 |
| DHS-04 | 1/4" | 1/4" | 6.3 | 6.3 |
| DHS-05 | 5/16" | 5/16" | 7.9 | 7.9 |
| DHS-06 | 3/8" | 3/8" | 9.5 | 9.5 |
| DHS-07 | 7/16" | 7/16" | 11.1 | 11.1 |
| DHS-08 | 1/2" | 1/2" | 12.7 | 12.7 |
| DHS-0810 | 1/2" | 5/8" | 12.7 | 15.9 |
| DHS-19 | 17/32" | 17/32" | 13.5 | 13.5 |
| DHS-09 | 9/16" | 9/16" | 14.3 | 14.3 |
| DHS-20 | 19/32" | 19/32" | 15.1 | 15.1 |
| DHS-10 | 5/8" | 5/8" | 15.9 | 15.9 |
| DHS-1011 | 5/8" | 11/16" | 15.9 | 17.5 |
| DHS-22 | 21/32" | 21/32" | 16.7 | 16.7 |
| DHS-11 | 11/16" | 11/16" | 17.5 | 17.5 |
| DHS-12 | 3/4" | 3/4" | 19.0 | 19.0 |
| DHS-13 | 13/16" | 13/16" | 20.6 | 20.6 |
| DHS-14 | 7/8" | 7/8" | 22.2 | 22.2 |
| DHS-15 | 15/16" | 15/16" | 23.8 | 23.8 |
| DHS-16 | 1" | 1" | 25.4 | 25.4 |
| DHS-17 | 1-1/16" | 1-1/16" | 27.0 | 27.0 |
Specifications
| Part number | DHS-1011 |
| Bores | 5/8" (15.9 mm) + 11/16" (17.5 mm) |
| Material | Billet aluminum, black anodized |
| Hardware | Stainless Allen-head centre screw |
| Liner (optional) | FRS-0375X025 adhesive foam rubber strip, sold separately |
Frequently asked questions
Which size do I need?
Measure the outside diameter of each hose or line and choose the matching bore. The AN size alone is not enough: hose of the same AN size varies in outside diameter.
My hose is between sizes. What do I do?
Choose the next size up and line the bore with FRS-0375X025 foam strip.
Questions and support
Not sure which size you need? Email [email protected] with your hose outside diameters before you order.
Racetronix provides technical support to verified customers through our support forum, not by phone or email. Please request forum access when you place your order so your account is approved before your parts arrive. The forum is moderated, open 24/7, and holds a knowledge base going back to 1999.
