Fitting, PTFE 90° Forged Swivel, -12 AN JIC Female, Black
Quick Overview
- PTFE hose end, 90-degree forged swivel -12 hose to -12 AN female
- Fits smooth-bore PTFE hose only
- Ferrule (olive) included
- Not for rubber, convoluted or nylon hose
- E85 compatible, black anodized 6061-T6 aluminum
Show More
$30.71
per EACH (USD)PTFE Hose End, 90° forged, -12 Hose to -12 AN JIC Female Swivel, Black
Fits -12 smooth-bore PTFE hose, with a -12 AN JIC female swivel, 90° bend.
The Racetronix FIT-690912 is a forged 90-degree hose end for -12 PTFE hose with a -12 AN JIC female swivel (37° flare). Thread it onto any -12 AN male fitting, union or port.
Key features
- -12 PTFE hose end.
- -12 AN JIC female swivel (37° flare).
- 90° forged body: one piece, forged from an aluminum blank and CNC machined inside and out. A forged body is a little stronger and takes more abuse; the turn inside is machined, not a radius bend.
- E85 compatible.
- 6061-T6 aluminum, black anodized.
The AN end seals metal to metal on its 37° flare; do not use tape or sealant. The hose end seals on the ferrule.
Specifications
| Part number | FIT-690912 |
| Hose size | -12 |
| AN end | -12 AN JIC female swivel, 1-1/16"-12, 37° flare |
| Angle | 90°, forged |
| Fits | Smooth-bore PTFE hose: Racetronix TFT-1165, TFT-1167, TFT-1168, TFT-1170 and industry-standard equivalents |
| Includes | Nut, ferrule and fitting head |
| Material | 6061-T6 aluminum, black anodized |
| Fuel compatibility | Gasoline and E85 |
Tech drawing/schematic
Series drawing with dimensions and wrench sizes for every size. Click to enlarge.
Fits Racetronix TFT-1165, TFT-1167, TFT-1168 and TFT-1170 PTFE hose, and industry-standard smooth-bore PTFE hose from other makers such as Vibrant and Fragola. If you are not sure, compare the bore and outside diameter of your hose with ours. It does not fit rubber hose, convoluted PTFE hose or nylon tube; these are not rubber-hose fittings.
How it assembles
The hose end is three parts: the nut, the ferrule (some people call it an olive) and the fitting head with its nipple. The ferrule is included.
- Wrap the cut mark in 3 to 5 layers of masking tape (not electrical tape) and cut the hose square with a thin metal or diamond cutting disc.
- Trim any braid strands flush with the PTFE liner. Slide the nut onto the hose (remove the tape first on black-jacketed TFT-1170B hose and strip the jacket back).
- Fan the braid out evenly, clean the liner and ferrule with brake cleaner, and push the ferrule onto the liner until it bottoms out, with all of the braid outside the ferrule.
- Push the ferrule fully into the nut. Once it is seated it cannot be pulled back out; the hose would have to be re-cut.
- Start the fitting head by hand, then tighten with an aluminum AN wrench until firm. PTFE fittings do not bottom out hex to hex: a small gap is normal.
Full step-by-step instructions are on our support forum.
Lookup chart: PTFE hose ends to AN JIC female
Every size and angle in this range. This part is highlighted. Click a column heading to sort by it; click again to reverse. On a phone, swipe the chart sideways.
-3 straight and swept-tube ends have a fixed JIC female; the forged -3 ends swivel. All other sizes swivel. Metric ends: FIT-PF845M165 (45°, -8 hose to M16x1.5) and FIT-P690M145 (90°, -6 hose to M14x1.5).
Need an EFI quick-connect on the hose instead of an AN end? See our EFI quick-connect PTFE hose ends: female straight, female 45°, female 90°, male straight and male 90°.
Cross-reference: equivalent part numbers
The FIT-690912 replaces or compares with these parts from other brands. "Similar" means a close match that differs in a detail such as material, finish, swivel style or body type.
| Brand | Part number | Match |
|---|---|---|
| Fragola | 689012BL | Similar |
| Vibrant | 28912 | Similar |
| Aeromotive | 15361 | Similar |
| Redhorse | 1290-12-2 | Similar |
About this cross-reference. We compiled these equivalent part numbers from the manufacturers’ published catalogs and websites, and we update them when we can. We have not fitted or tested other brands’ parts with ours. Please check the hose size, bore and end type against your application before you order, or email [email protected] and we’ll help. Final fitment is the buyer’s responsibility. Brand names and part numbers belong to their owners and are used for reference only; Racetronix is not affiliated with these companies.
Frequently asked questions
Will it fit my hose?
It fits Racetronix TFT-1165, TFT-1167, TFT-1168 and TFT-1170 PTFE hose and other industry-standard smooth-bore PTFE hose, such as Vibrant and Fragola. It does not fit rubber hose, convoluted PTFE hose or nylon tube. Compare bore and outside diameter if you are unsure.
Can I reuse it?
The nut and fitting head can be reused, but the ferrule stays on the hose once it is seated. To remake a joint, cut the hose back and use a new ferrule.
Why is there a gap between the hexes?
PTFE hose ends seal by compressing the ferrule, not by bottoming out. A small gap between the hexes is normal.
Is it E85 compatible?
Yes. It is made from 6061-T6 aluminum and black anodized, and works with gasoline and E85.
Questions and support
Not sure which fitting your build needs? Email [email protected] before you order.
Racetronix provides technical support to verified customers through our support forum, not by phone or email. Please request forum access when you place your order so your account is approved before your parts arrive. The forum is moderated, open 24/7, and holds a knowledge base going back to 1999.
