Olive, AN10 / 5/8", Brass
Quick Overview
- Brass olive, 5/8 inch tube
- Spare for Racetronix compression adapters
- Compresses onto the tube, no flaring
- Tube must be smooth and clean
- Brass
Show More
$1.73
per EACH (USD)Brass Olive, 5/8" Tube (AN10)
Spare brass olive for Racetronix 5/8" tube compression adapters.
The Racetronix FIT-OLV10 is a spare brass olive (compression ferrule) for 5/8" outside-diameter tube. It fits Racetronix tube compression adapters, both the AN JIC female and AN JIC male versions. The olive slips over the tube and compresses onto it when the compression nut is tightened, gripping and sealing the tube without flaring.
Key features
- For 5/8" OD tube.
- Brass compression olive.
- Fits Racetronix tube compression adapters.
- No flaring needed.
The olive seals only on a tube of the correct outside diameter with a smooth, clean surface. Rusted, pitted, scratched or out-of-round tube will leak. Use a new olive when refitting a joint.
Specifications
| Part number | FIT-OLV10 |
| Tube size | 5/8" OD |
| Material | Brass |
Lookup chart: olives and the adapters they fit
Every part in this series. This part is highlighted. Click a column heading to sort by it; click again to reverse. On a phone, swipe the chart sideways.
| Olive | Tube OD | Fits AN JIC female adapters | Fits AN JIC male adapters |
|---|---|---|---|
| FIT-OLV4 | 1/4" | ADF-JF3HL4, ADF-JF4HL4 | ADF-3HL14, ADF-4HL14 |
| FIT-OLV5 | 5/16" | ADF-JF6HL5 | ADF-6HL516 |
| FIT-OLV6 | 3/8" | ADF-JF6HL6 | ADF-6HL38, ADF-8HL38 |
| FIT-OLV8 | 1/2" | ADF-JF8HL8 | ADF-8HL12, ADF-10HL12 |
| FIT-OLV10 | 5/8" | ADF-JF10HL10 | ADF-10HL58, ADF-12HL58 |
| FIT-OLV12 | 3/4" | ADF-JF12HL12 | ADF-12HL34 |
Adapters: AN JIC Female to Tube Compression and AN JIC Male to Tube Compression.
Frequently asked questions
Can I reuse an olive?
Once compressed onto a tube it stays there. Use a new olive when you fit a new tube or remake a joint.
Questions and support
Not sure which fitting your build needs? Email [email protected] before you order.
Racetronix provides technical support to verified customers through our support forum, not by phone or email. Please request forum access when you place your order so your account is approved before your parts arrive. The forum is moderated, open 24/7, and holds a knowledge base going back to 1999.
