• Your shopping cart is empty.

    To put something in your Shopping Cart, you must first browse or search for an item. When an item interests you, click the button labeled "Add to Cart", the item will be shown here.

FL98 Fuel Pump Kit (RXP255E)

Base Price:

$156.49

Your Price:

$156.49

 
Item Code : RFPK-005

FL98 Fuel Pump Kit (RXP255E)


RFPK-005 - 1985-1992 TPI / L98 Camaro / Firebird / Trans AM


Racetronix Fuel Pump Kit

The RFPK-005 is recommended for factory HP upgrades to 600FWHP @ 43.5PSI using the factory lines and fuel pressure regulator. HP support may vary for N/A or F/I motors. Please factor in a 20-25% safety margin between what your motor needs and what your fuel system can supply. Please contact your local Racetronix dealer to discuss your fuel requirements.

Racetronix Fuel Pump Assembly

  • Racetronix RXP255 255LPH turbine fuel pump with reduced noise and enhanced reliability with ethanol- enhanced fuels*
  • Filter Sock - 30 micron filtering better than factory
  • Walbro GSS to GM Power Plug Adapter
  • High Pressure Fuel Line
  • Gear Clamps
  • Rubber Pump Mount
  • Pump sound insulation sleeve
  • OE-Style molded tank gasket



Racetronix Fuel Pump Upgrade Harness

  • Plug & Play (no cutting or splicing required)
  • Weatherproof factory connectors
  • Heavy 10 gauge automotive-grade copper wire
  • Heavy-duty weatherproof relay
  • Weatherproof fuse holder
  • Alternator-direct power for maximum pump performance
  • Silicon grease, spare fuse, wire ties included
  • Stainless steel mounting hardware
  • Body ground upgrade with battery nuts (optional)
  • Compatible with various pump boosters (i.e. KB, MSD) (optional)

All fuel pumps are voltage sensitive, the lower the voltage the lower the fuel volume. High-performance pumps exhibit a significant increase in fuel volume with increased supply voltage. A pump's average fuel volume increases over 18% by increasing the supply voltage from 12 to 13.5 volts. The factory harness is marginal at best for supplying a factory pump with enough voltage to perform well. This is why the 'hot wire' modification is so popular. Replacing the factory pump with a high-performance pump can easily double the current demand under W.O.T. pressures.  The voltage drop in the factory harness increases proportionally to the current demands of the pump. Racetronix has documented tests where the voltage drop in a factory harness has caused over a 25% drop in fuel pump volume. The Racetronix harness uses heavy 10 gauge copper wire to reduce voltage-drop to very low levels. The factory gauge of wire used is three gauges thinner. Our power feed comes off the back of the alternator where voltage is highest. It then runs through a Delphi weatherproof fuse holder and then to the back of the car. The Racetronix harness uses three-position male and female weatherpack connectors which plug in-line with the factory harness at the back of the tank. No cutting or splicing is required. High-quality weatherproof fuse holders and relays are used for maximum reliability. The Racetronix harness has a redundant ground upgrade as it is necessary to improve the harness on the negative side of the pump's supply as well. Racetronix supplies a spare fuse, black vinyl wire ties, silicon grease and mounting hardware with each kit.

Racetronix harnesses are considered the best by which all others are judged. Attention to detail in every Racetronix harness is evident at first glance. Racetronix spares no expense to ensure reliability, ease of installation and performance.

All Racetronix harnesses are assembled using our computerized crimp-quality monitoring system and then circuit checked for the utmost in reliability. This Racetronix harness is backed by our limited lifetime warranty.

UPGRADE OPTIONS

BGK
An optional battery to body ground upgrade kit is available (P/N BGK8). This kit upgrades the under-rated factory ground wire running from the battery to the chassis. It includes an 8 gauge copper wire fitted with terminals and battery nuts with accessory taps. We highly recommend this inexpensive option because this is a weak point in these cars.

PBIC
The Racetronix harness comes equipped with an interface connector just after the relay (see product picture above). This connector in combination with an optionally supplied connector set (P/N PBIC) allows for easy plug and play addition of a pump booster / voltage amplifier such as the MSD or KB units. These voltage amplifiers / boosters will allow the Racetronix single in-tank pump system to support an additional 100-200 flywheel HP (B.S.F.C. dependant) when run at 16-17 volts. This configuration offloads the excessive current draw placed on the factory wiring onto the heavy gauge Racetronix harness system. System diagnosis becomes easier by simply being able to unplug, isolate and bypass sections of the wiring system.

 



Select options; the kit price is automatically updated with the new price.

[Kit Item Name]
Qty

FUEL PUMPS - IN-TANK

1
255LPH Fuel Pump, Hi-Pressure/Volume E85 (Qty:1)

Fuel Pump Installation Kits (RX-PIK)

1
GM Universal Pump Install Kit (400-835) (Qty:1)

FUEL PUMP - HOTWIRE / UPGRADE HARNESSES

1
FL98 Fuel Pump Wiring Harness (Qty:1)

FUEL PUMP KITS - (RACETRONIX)

1
1
Base Price: $156.49 Your Price: $