-8 Hose, Teflon, SS Braid
Quick Overview
- -8 AN PTFE hose, stainless braid
- 0.405 in. ID, 2000 psi operating, 8000 psi burst
- Non-conductive PTFE liner
- -65 to 450 F continuous, SAE 100R14
- Takes Racetronix reusable and crimp PTFE ends
Show More
$7.42
$11.20
per Feet (USD)PTFE Hose, Stainless Braid, -8 AN
0.405" (10.3 mm) inside diameter. 2000 psi operating, 8000 psi burst.
The Racetronix TFT1167-08 is -8 AN PTFE (Teflon) hose: a smooth-bore PTFE liner, non-conductive and 300 series stainless steel wire braid.
It takes Racetronix reusable and crimp PTFE hose ends, and industry-standard smooth-bore PTFE hose ends from other makers. The charts near the bottom of this page list every Racetronix hose end that fits -8 PTFE hose. The same size is also available as TFT1170-08 (conductive, bare braid) and TFT1170-08B (conductive, black jacket).
Key features
- -8 AN: 0.405" (10.3 mm) inside diameter.
- 2000 psi operating pressure, 8000 psi burst.
- Smooth-bore PTFE liner, non-conductive.
- 300 series stainless steel wire braid.
- Temperature range -65°F to 450°F continuous.
- Meets or exceeds SAE 100R14.
This hose has a standard (non-conductive) PTFE liner. Fuel moving fast through a hose builds a static charge on a plain PTFE liner that can arc to the braid and pinhole the hose, so for fuel lines we recommend our conductive TFT1170 PTFE hose0. Non-conductive PTFE hose is a good choice for oil, coolant, brake fluid, power steering and other lines.
Specifications
| Part number | TFT1167-08 |
| AN size | -8 |
| Inside diameter | 0.405" (10.3 mm) |
| Outside diameter | 0.549" (13.9 mm) |
| Operating pressure | 2000 psi |
| Burst pressure | 8000 psi |
| Minimum bend radius | 5.2" |
| Weight | 0.124 lb/ft |
| Liner | Smooth-bore PTFE, non-conductive |
| Reinforcement | 300 series stainless steel wire braid |
| Temperature | -65°F to 450°F (-54°C to 232°C) continuous; -100°F to 500°F (-73°C to 260°C) intermittent |
| Standard | Meets or exceeds SAE 100R14 |
| Fluids | Oil, coolant, brake fluid, power steering and other automotive fluids. For fuel, see the conductive TFT1170. |
| Hose ends | Racetronix reusable and crimp PTFE hose ends for -8 hose. Not for rubber hose ends or push-lock fittings. |

Current production may vary from the image.
Making a hose assembly
Wrap the cut mark in masking tape and cut the hose square with a thin cutting disc. Leave the tape on while you push the hose into the nut, so the braid does not fray. Spread the braid so the ferrule (olive) sits between the braid and the PTFE liner, make sure no braid wires are trapped under the ferrule, then thread the fitting into the nut with an aluminum AN wrench. A small gap between the hexes is normal. Full steps are on each hose end page.
Size chart: Racetronix PTFE hose
Every size of our conductive (TFT1170) and non-conductive (TFT1167) PTFE hose. This part is highlighted. Outside diameters are for the bare stainless braid; the black jacket adds to it. Click a column heading to sort; on a phone, swipe the chart sideways.
| Part | AN size | Type | Inside diameter | Outside diameter | Operating pressure | Burst pressure | Bend radius |
|---|---|---|---|---|---|---|---|
| TFT1170-03 | -3 | Conductive, bare braid | 0.138" (3.5 mm) | 0.250" (6.3 mm) | 3000 psi | 12000 psi | 2" |
| TFT1170-04 | -4 | Conductive, bare braid | 0.188" (4.8 mm) | 0.312" (7.9 mm) | 3000 psi | 12000 psi | 2" |
| TFT1170-06 | -6 | Conductive, bare braid | 0.328" (8.3 mm) | 0.445" (11.3 mm) | 2500 psi | 10000 psi | 4" |
| TFT1170-06B | -6 | Conductive, black jacket | 0.328" (8.3 mm) | — | 2500 psi | 10000 psi | 4" |
| TFT1170-08 | -8 | Conductive, bare braid | 0.405" (10.3 mm) | 0.549" (13.9 mm) | 2000 psi | 8000 psi | 5.2" |
| TFT1170-08B | -8 | Conductive, black jacket | 0.405" (10.3 mm) | — | 2000 psi | 8000 psi | 5.2" |
| TFT1170-10 | -10 | Conductive, bare braid | 0.500" (12.7 mm) | 0.648" (16.5 mm) | 1500 psi | 6000 psi | 6.5" |
| TFT1170-10B | -10 | Conductive, black jacket | 0.500" (12.7 mm) | — | 1500 psi | 6000 psi | 6.5" |
| TFT1170-12 | -12 | Conductive, bare braid | 0.625" (15.9 mm) | 0.775" (19.7 mm) | 1200 psi | 4800 psi | 7.7" |
| TFT1170-12B | -12 | Conductive, black jacket | 0.625" (15.9 mm) | — | 1200 psi | 4800 psi | 7.7" |
| TFT1170-16 | -16 | Conductive, bare braid | 0.875" (22.2 mm) | 1.030" (26.2 mm) | 1000 psi | 4000 psi | 8" |
| TFT1167-03 | -3 | Non-conductive, bare braid | 0.138" (3.5 mm) | 0.250" (6.3 mm) | 3000 psi | 12000 psi | 2" |
| TFT1167-03B | -3 | Non-conductive, black jacket | 0.138" (3.5 mm) | — | 3000 psi | 12000 psi | 2" |
| TFT1167-04 | -4 | Non-conductive, bare braid | 0.188" (4.8 mm) | 0.312" (7.9 mm) | 3000 psi | 12000 psi | 2" |
| TFT1167-04B | -4 | Non-conductive, black jacket | 0.188" (4.8 mm) | — | 3000 psi | 12000 psi | 2" |
| TFT1167-06 | -6 | Non-conductive, bare braid | 0.328" (8.3 mm) | 0.445" (11.3 mm) | 2500 psi | 10000 psi | 4" |
| TFT1167-08 | -8 | Non-conductive, bare braid | 0.405" (10.3 mm) | 0.549" (13.9 mm) | 2000 psi | 8000 psi | 5.2" |
Reusable hose ends for -8 PTFE hose
Every Racetronix reusable PTFE hose end that fits -8 hose (49 parts). Rows are the end you connect to; columns are the angle. Click a part number to open it. Click a column heading to sort; on a phone, swipe the chart sideways.
| Connects to | Straight | 30° | 45° | 60° | 90° | 120° | 150° | 180° | Banjo |
|---|---|---|---|---|---|---|---|---|---|
| -6 AN JIC female | FIT-P8JF6 | — | FIT-P845JF6 | — | FIT-P890JF6 | — | — | FIT-P818JF06 | — |
| -8 AN JIC female | FIT-680108 | FIT-683008 | FIT-684508 | FIT-686008 | FIT-689008 FIT-690908 | FIT-681208 | FIT-681508 | FIT-681808 | — |
| -10 AN JIC female | FIT-P8JF10 | — | FIT-P845JF10 | — | FIT-P890JF10 | — | — | FIT-P818JF10 | — |
| -6 AN ORB male | FIT-P8RM6 | — | FIT-P845RM6 | — | FIT-P890RM6 | — | — | FIT-P8R1806 | — |
| -8 AN ORB male | FIT-680708 | — | — | — | FIT-689708 | — | — | FIT-P8R1808 | — |
| -10 AN ORB male | FIT-P8RM10 | — | FIT-P845RM10 | — | FIT-P890RM10 | — | — | FIT-P8R1810 | — |
| M16x1.5 male | — | — | FIT-PF845M165 | — | — | — | — | — | — |
| Banjo, -8 AN ORB banjo bolt | — | — | — | — | — | — | — | — | FIT-680008 FIT-680008LP |
| 5/16" (8 mm) EFI quick-connect female | FIT-P8QDF56 | — | — | — | FIT-P8QDF9056 | — | — | — | — |
| 5/16" (8 mm) EFI quick-connect female, Crescent-Lock | FIT-P8QDF56CL | — | — | — | FIT-P8QDF9056FF | — | — | — | — |
| 3/8" (10 mm) EFI quick-connect female | FIT-P8QDF38 | — | — | — | FIT-P8QDF9038 | — | — | — | — |
| 3/8" (10 mm) EFI quick-connect female, Crescent-Lock | FIT-P8QDF38CL | — | FIT-P8QDF4538FF | — | FIT-P8QDF9038FF | — | — | FIT-P8QDF1838FF | — |
| 1/2" EFI quick-connect female | FIT-P8QDF12 | — | FIT-P8QDF4512 | — | FIT-P8QDF9012 | — | — | — | — |
| 5/16" (8 mm) EFI quick-connect male | FIT-P8QDM56 | — | — | — | FIT-P8QDM9056 | — | — | — | — |
| 3/8" (10 mm) EFI quick-connect male | FIT-P8QDM38 | — | — | — | FIT-P8QDM9038 | — | — | — | — |
| 1/2" EFI quick-connect male | FIT-P8QDM12 | — | — | — | — | — | — | — | — |
EFI quick-connect hose ends do not swivel: the angle is fixed to the hose end. Once connected, a male quick-connect can still turn inside the female, because the joint seals on O-rings and is held by a retainer. The Crescent-Lock versions add a Crescent-Lock retainer on the quick-connect.
Replacement ferrules (-8): FIT-OLIVE8B.
Replacement nuts (-8): FIT-TFNUT8B (black), FIT-TFNUT8BL (blue), FIT-TFNUT8G (gold), FIT-TFNUT8R (red), FIT-TFNUT8S (silver), FIT-TFNUT8V (violet).
See all reusable PTFE hose ends.
Crimp hose ends for -8 PTFE hose
Racetronix crimp PTFE hose ends that fit -8 hose (4 parts), for permanent assemblies made with a hose crimper. Each hose end page lists the finished crimp diameter. Click a part number to open it.
| Connects to | Straight | 45° | 90° |
|---|---|---|---|
| -8 AN JIC female | FIT-CP8F | FIT-CP8F45 | FIT-CP8F90 |
| 3/8" SAE J2044 EFI quick-connect female | FIT-CP8QDF38CL | — | — |
Crimp collars (-8): FIT-CP8C. Aluminum hose ends come with their collar; the collars are also sold as replacements.
See all crimp PTFE hose ends.
Frequently asked questions
Is it E85 compatible?
Yes. PTFE resists ethanol, E85, race fuels and the solvents in today’s gasoline, and it is essentially impermeable to fuel, so it does not swell, soften or let fuel vapour through the way rubber hose can. For fuel lines we recommend the conductive TFT1170.
Do I need conductive hose?
For fuel lines, we recommend it. Fuel flowing through a plain PTFE liner builds a static charge that can arc to the braid and pinhole the hose; a conductive liner drains it away. For oil, coolant, brake and similar lines, non-conductive PTFE hose is fine.
Which hose ends fit it?
Racetronix reusable and crimp PTFE hose ends for -8 hose (see the charts above), and industry-standard smooth-bore PTFE hose ends from other makers. Rubber hose ends and push-lock fittings do not fit PTFE hose.
Is it CARB certified?
We do not sell it as CARB certified. Certification applies to a tested, finished hose assembly, and our hose is assembled by the customer.
How do I cut it?
Wrap the cut in masking tape and cut square with a thin cutting disc, then check that no braid wires are frayed or pushed into the liner.
Questions and support
Not sure which hose your build needs? Email [email protected] before you order.
Racetronix provides technical support to verified customers through our support forum, not by phone or email. Please request forum access when you place your order so your account is approved before your parts arrive. The forum is moderated, open 24/7, and holds a knowledge base going back to 1999.



