90° Swivel Adapter, -6 AN JIC Female to 1/4" NPT Male, Black
Quick Overview
- 90-degree swivel adapter, -6 AN JIC female to 1/4" NPT male
- -6 AN JIC female swivel nut, 37-degree flare
- 1/4" NPT male tapered pipe thread
- Swivel lets you align the hose after install
- E85 compatible, black anodized 6061-T6 aluminum
Show More
$20.11
per EACH (USD)90° Swivel Adapter, -6 AN JIC Female to 1/4" NPT Male, Black
Turns a -6 AN hose end or fitting 90 degrees into a 1/4" NPT female port.
The Racetronix ADF-499406 joins a -6 AN male (37° JIC) hose end or fitting to a 1/4" NPT female port, with a 90-degree turn. The -6 AN female end has a swivel nut, so you can thread the adapter into the port first and then line the hose up in any direction before you tighten it.
Key features
- -6 AN JIC female swivel (37° flare) on one end.
- 1/4" NPT male pipe thread on the other.
- 90-degree elbow body.
- Swivel nut lets you align the hose after the NPT end is tight.
- E85 compatible.
- 6061-T6 aluminum, black anodized.
NPT is a tapered pipe thread and seals on the threads, so use a fuel-resistant thread sealant on the NPT end. The JIC end seals metal to metal on its 37° flare: do not put sealant or tape on the flare or its threads.
Specifications
| Part number | ADF-499406 |
| End 1 | -6 AN JIC female swivel (37° flare) |
| End 2 | 1/4" NPT male |
| Angle | 90° |
| Material | 6061-T6 aluminum, black anodized |
| Fuel compatibility | Gasoline and E85 |
| Dimensions (inches, see drawing) | A 1.70 · B 2.00 · C 0.54 · D 0.60 |
| Wrench sizes | WS1 (swivel nut) 11/16" · WS2 (NPT hex) 7/8" |
Drawing
Click the drawing to enlarge. All dimensions in inches.
Lookup chart
Every adapter in this series. Click a column heading to sort by it; click again to reverse.
| Part number | AN JIC female | NPT male | A | B | C | D | WS1 | WS2 |
|---|---|---|---|---|---|---|---|---|
| ADF-499403 | -3 AN | 1/8" | 1.25 | 1.50 | 0.40 | 0.39 | 1/2" | 9/16" |
| ADF-499404 | -4 AN | 1/8" | 1.35 | 1.65 | 0.40 | 0.39 | 9/16" | 11/16" |
| ADF-499444 | -4 AN | 1/4" | 1.35 | 1.82 | 0.54 | 0.60 | 9/16" | 11/16" |
| ADF-499462 | -6 AN | 1/8" | 1.60 | 1.82 | 0.40 | 0.40 | 11/16" | 11/16" |
| ADF-499406 | -6 AN | 1/4" | 1.70 | 2.00 | 0.54 | 0.60 | 11/16" | 7/8" |
| ADF-499466 | -6 AN | 3/8" | 1.70 | 2.18 | 0.68 | 0.60 | 11/16" | 7/8" |
| ADF-499407 | -8 AN | 1/4" | 1.91 | 2.29 | 0.54 | 0.60 | 7/8" | 7/8" |
| ADF-499408 | -8 AN | 3/8" | 1.93 | 2.28 | 0.68 | 0.61 | 7/8" | 1" |
| ADF-499409 | -8 AN | 1/2" | 2.00 | 2.50 | 0.85 | 0.79 | 7/8" | 1" |
| ADF-499411 | -10 AN | 3/8" | 2.25 | 2.50 | 0.68 | 0.60 | 1" | 1-1/16" |
| ADF-499410 | -10 AN | 1/2" | 2.25 | 2.75 | 0.85 | 0.80 | 1" | 1-1/16" |
| ADF-499413 | -12 AN | 1/2" | 2.50 | 2.90 | 0.85 | 0.78 | 1-1/4" | 1-1/4" |
| ADF-499412 | -12 AN | 3/4" | 2.50 | 2.90 | 1.06 | 0.80 | 1-1/4" | 1-1/4" |
| ADF-499415 | -16 AN | 3/4" | 2.81 | 3.17 | 1.06 | 0.78 | 1-1/2" | 1-1/2" |
| ADF-499416 | -16 AN | 1" | 2.85 | 3.50 | 1.32 | 1.00 | 1-1/2" | 1-1/2" |
Frequently asked questions
Do I need thread sealant?
On the NPT end, yes: it is a tapered pipe thread that seals on the threads, so use a fuel-resistant sealant. On the JIC end, no: it seals on the 37° flare, and sealant there can cause a leak.
What does the swivel do?
The -6 AN female nut turns independently of the body. Tighten the NPT end into the port first, then point the JIC end where you need it and tighten the hose end onto it.
Which size do I need?
Match the AN size to your hose end and the NPT size to the port. The lookup chart lists every combination in this series with its dimensions; sort it by either column to find yours.
Questions and support
Not sure which adapter your build needs? Email [email protected] before you order.
Racetronix provides technical support to verified customers through our support forum, not by phone or email. Please request forum access when you place your order so your account is approved before your parts arrive. The forum is moderated, open 24/7, and holds a knowledge base going back to 1999.
