Welcome to Racetronix
Welcome to Racetronix  |  All prices indicated are in USD($)  905-477-7014  |   Help   |  Catalogs  |  About Us

Hobbs 10 PSI pressure switch, normally open, Metri-Pack 280 connector

Quick Overview

  • Closes at 10 PSI (±2 PSI) on rising pressure
  • Normally open, single circuit (SPST-N.O.), two terminals
  • 1/8”-27 NPT male port, 7/16” hex
  • Sealed 2-way Metri-Pack 280 connector (RCS-007 sold separately)
  • Set point recertified in-house on our lab-grade test fixture

Show More
Item #: HPS-10

$27.10

per EACH (USD)
This is an obsolete Item
 
 
 In Stock & Ready to Ship

Hobbs Pressure Switch, 10 PSI, Normally Open, Metri-Pack 280

A sealed, single-circuit (SPST) pressure switch that closes at 10 PSI, with a 1/8" NPT male port and a 2-way Metri-Pack 280 connector.

The HPS-10 is a normally open (N.O.) pressure switch for extended-duty use. Its contacts close when the pressure at the port rises to 10 PSI and open again when it falls. Use it to turn on a second fuel pump under boost, to switch a relay from oil pressure, or to trigger a light or alarm at a set pressure.

The switch threads into any 1/8" NPT female port and plugs in through a sealed 2-way Metri-Pack 280 connector. Mating connectors, ready-made harnesses, adapters and manifold blocks are listed below, so you can put together everything you need to mount and wire it.

Key features

  • Closes at 10 PSI (±2 PSI), rising pressure.
  • Normally open, single circuit (SPST-N.O.): two terminals.
  • Sealed 2-way Metri-Pack 280 connector.
  • 1/8"-27 NPT male port, 7/16" hex.
  • Direct-action blade contacts, silver alloy, gold plated.
  • Polyimide diaphragm for air, oils and similar hydrocarbon media.
  • Proof pressure 500 PSI, rated -40 to 120 °C.
  • Recertified in-house: Racetronix checks the set point on our own lab-grade test fixture.
Connector not included

The switch needs a mating 2-way Metri-Pack 280 connector, sold separately: the RCS-007 connector set, or one of the ready-made harnesses listed under Connectors and harnesses below.

Switch a relay, not a pump

The contacts are rated 8 A resistive at 12 VDC. Use the switch to drive a relay coil, and let the relay carry the fuel pump or any other motor load.

Custom set points

Need a switch set slightly above or below its standard set point for a special application? Racetronix can recalibrate it on our test fixture for an extra charge. Email [email protected] before you order.

Specifications

Part numberHPS-10
Set point10 PSI ±2 PSI, contacts close on rising pressure
CircuitSPST, normally open (N.O.)
Switch typeDirect action, blade contact
Contact rating, resistive15 A at 6 VDC; 8 A at 12 VDC; 4 A at 24 VDC
Contact rating, inductive1 A at 120 VAC; 0.5 A at 240 VAC
ContactsSilver alloy, gold plated
Max. operating pressure150 PSI
Proof pressure500 PSI
Burst pressure750 PSI
MediaAir, motor oils, transmission oils, jet fuels and similar hydrocarbon media. Not for water.
Operating temperature-40 to 120 °C (-40 to 248 °F)
Port1/8"-27 NPT male, 7/16" hex
Connector2-way Metri-Pack 280, sealed. Mates with RCS-007 (not included)
DiaphragmPolyimide film
BasePlated steel, with a brass port fitting
CoverGlass-reinforced polyester
Overall length2.93"
Base diameter1.51"

Tech drawing/schematic

Racetronix HPS-10 pressure switch cutaway with reference dimensions

Cutaway view. Click to enlarge. Reference dimensions in inches.

Set points

The same switch is made in seven set points. All are normally open and close on rising pressure.

Part numberSet point (rising)ToleranceMax. operating pressure
HPS-22 PSI±0.5 PSI150 PSI
HPS-44 PSI±1 PSI150 PSI
HPS-77 PSI±2 PSI150 PSI
HPS-1010 PSI±2 PSI150 PSI
HPS-1515 PSI±3 PSI150 PSI
HPS-3030 PSI±5 PSI250 PSI
HPS-5858 PSI±6 PSI250 PSI

Connectors and harnesses

Connector sets

Part numberDescription
Racetronix RCS-007RCS-007Connector Set, Hobbs Switch
Mating 2-way Metri-Pack 280 connector set for 18-16 AWG wire. The usual choice.
Racetronix RCS-057RCS-057Connector Set, Hobbs Switch, Other 12-14 Ga.
The same connector set with seals for 14-12 AWG wire.

Interface harnesses for Racetronix dual-pump harnesses

Part numberDescription
Racetronix HIH-002HIH-002Hobbs Interface Harness 20" - CEPH
20" harness.
Racetronix HIH-003HIH-003Hobbs Interface Harness 24"
24" harness.
Racetronix HIH-001HIH-001Hobbs Interface Harness 72" - DPK
72" harness.
Racetronix HIH-004HIH-004Hobbs Interface Harness 16Ft
16 ft harness.

Adapters and manifold blocks

Every part below has a 1/8" NPT female port for the switch. Use thread sealant or PTFE tape on the switch's NPT threads.

Inline gauge adapters (tee into an AN line)

Part numberDescription
Racetronix ADF-3J3JF18TADF-3J3JF18TInline gauge adapter, -3 AN male to -3 AN female, 1/8-inch NPT port
Racetronix ADF-495000ADF-495000Inline Gauge Adapter, -4 AN JIC Male to Female, 1/8” NPT Port
Racetronix ADF-495005ADF-495005Inline gauge adapter, -6 AN male to -6 AN female, 1/8-inch NPT port
Racetronix ADF-495006ADF-495006Inline gauge adapter, -8 AN male to -8 AN female, 1/8-inch NPT port
Racetronix ADF-495008ADF-495008Inline gauge adapter, -10 AN male to -10 AN female, 1/8-inch NPT port
Racetronix ADF-495014ADF-495014Inline Gauge Adapter, -12 AN JIC Male to Female, 1/8” NPT Port
Racetronix ADF-495016ADF-495016Inline gauge adapter, -16 AN male to -16 AN female, 1/8-inch NPT port

AN fittings to 1/8" NPT female

Part numberDescription
Racetronix ADF-03J18FPTADF-03J18FPTAdapter, -3 AN JIC Male to 1/8” NPT Female
Racetronix ADF-04J18FPTADF-04J18FPTAdapter, -4 AN JIC Male to 1/8” NPT Female
Racetronix ADF-06J18FPTADF-06J18FPTAdapter, -6 AN JIC Male to 1/8” NPT Female
Racetronix ADF-903J18FPADF-903J18FP90° Adapter, -3 AN JIC Male to 1/8” NPT Female
Racetronix ADF-904J18FPADF-904J18FP90° Adapter, -4 AN JIC Male to 1/8” NPT Female
Racetronix ADF-906J18FPADF-906J18FP90° Adapter, -6 AN JIC Male to 1/8” NPT Female
Racetronix ADF-908J18FPADF-908J18FP90° Adapter, -8 AN JIC Male to 1/8” NPT Female
Racetronix FGAF-418FGAF-418Gauge Adapter, -4 AN JIC Female to 1/8” NPT Female
Racetronix FGAF-90418FGAF-9041890° gauge adapter, -4 AN to 1/8-inch NPT female

Port adapters (ORB and metric male to 1/8" NPT female)

Part numberDescription
Racetronix ADF-6RM18FPTADF-6RM18FPTGauge Adapter, -6 AN ORB Male to 1/8” NPT Female
Racetronix ADF-8RM18FPTADF-8RM18FPTGauge Adapter, -8 AN ORB Male to 1/8” NPT Female
Racetronix ADF-M127F18ADF-M127F18Gauge Adapter, M12x1.75 Metric Male to 1/8” NPT Female

Hose barb adapters (vacuum or boost hose)

Part numberDescription
Racetronix ADF-NF18B18ADF-NF18B18Swivel Adapter, 1/8” NPT Female to 1/8” Multi-Barb
Racetronix ADF-NF18B36ADF-NF18B36Swivel Adapter, 1/8” NPT Female to 3/16” Multi-Barb
Racetronix ADF-NF18B14ADF-NF18B14Swivel Adapter, 1/8” NPT Female to 1/4” Multi-Barb
Racetronix ADF-NF18B56ADF-NF18B56Swivel Adapter, 1/8” NPT Female to 5/16” Multi-Barb
Racetronix ADF-NF18B38ADF-NF18B38Swivel Adapter, 1/8” NPT Female to 3/8” Multi-Barb

Boost/vacuum manifold blocks

Part numberDescription
Racetronix VBLOCK-X10LVBLOCK-X10LBoost/Vacuum Manifold Block, Inline, 12 x 1/8” NPT + 2 x 3/8” NPT, Black
Inline block: twelve 1/8" NPT ports on three faces.
Racetronix VBLOCK-X13SVBLOCK-X13SBoost/Vacuum Manifold Block, Square, 12 x 1/8” NPT + 2 x 3/8” NPT, Black
Square block: twelve 1/8" NPT ports on the top and four sides. Made for our multi-pump hanger and module kits.
Racetronix VBLOCK-GRD4XSVBLOCK-GRD4XSSensor Guard for VBLOCK-X13S Square Manifold, 4-Port
Billet guard that bolts over the four top ports of the VBLOCK-X13S and protects the switches and gauge.

Applications

  • Turning on a second or third fuel pump at a set boost pressure, through a relay
  • Fuel pump safety circuits that run the pump only with oil pressure, through a relay
  • Warning lights and alarms at a set pressure
  • Switching other relays from boost, oil or air pressure

Frequently asked questions

Is the connector included?

No. Order the RCS-007 connector set (18-16 AWG), the RCS-057 (14-12 AWG), or one of the ready-made harnesses.

Can it power a fuel pump directly?

No. Use it to switch the coil of a relay, and let the relay carry the pump current.

Does polarity matter?

No. It is a simple switch with two terminals; either terminal can go to either side of the circuit.

Which set point do I need?

Pick the pressure at which you want the circuit to switch on. For boost-activated pump staging, choose a set point a few PSI below the boost at which the extra pump is needed. Not sure? Email us with your setup before you order.

Can I adjust the set point myself?

We don't recommend it. The cap screws are small and strip easily, and setting the switch accurately takes a regulated pressure source, an accurate digital gauge and a continuity tester. Racetronix recalibrates switches in-house for an extra charge: email [email protected].

Questions and support

Not sure which switch, adapter or harness your build needs? Email [email protected] before you order.

Racetronix provides technical support to verified customers through our support forum, not by phone or email. Please request forum access when you place your order so your account is approved before your parts arrive. The forum is moderated, open 24/7, and holds a knowledge base going back to 1999.

© 2026 Racetronix. All rights reserved. | Part No: HPS-10 | Revision: Alpha