0
Welcome to Racetronix  |  All prices indicated are in USD($)  905-477-7014  |   Help Center  |  Catalogs  |  About Us
50 lb/hr Delphi High-Z Fuel Injector
  • 50 lb/hr Delphi High-Z Fuel Injector

50 lb/hr Delphi High-Z Fuel Injector

Item #: 17113738  MPN : 17113738

This is an obsolete Item

17113738 - DISCONTINUED (SEE P/N 01D066x)

THIS ITEM HAS BEEN DISCONTINUED. PLEASE VIEW P/N 01D116x or 01D066x AS SUPERIOR REPLACEMENTS.

FLOW-MATCHED 1% INJECTORS ARE SOLD IN PACKS VIA THE 'BUY IN' DROP-DOWN MENU ABOVE.

INJECTORS SOLD AS EACH ARE NOT FLOW-MATCHED (LISTED FACTORY TOLERANCE APPLIES)

TECHNICAL INFORMATION

Dynamically flowed and grouped to within 1% tolerance using Racetronix custom injector flow bench when purchased in packs.
All tests run with n-Heptane @ 20oC (+/-1oC), 3.0 Bar (+/-0.01 Bar), 14VDC (+/-0.05VDC), saturated driver with RC cutoff.

Injector flow rates are based on testing with n-Heptane test solvent (0.6855 g/ml). U.S. EPA emission test gasoline 40CFR86.113 (0.735g/ml) flows in most common injector designs at about a 3 to 4% higher rate than n-Heptane. A ratio of 1.035:1 can be used when converting the flow specifications above.

This high-impedance injector will work with all factory ECM/PCM injector drivers.

 

TYPICAL APPLICATIONS

High-performance aftermarket

OE P/N 17104487

ADDITIONAL INFORMATION

  • Grease supplied to lubricate o-rings prior to installation
  

Retail P/N: 17113738
MPN - Manufacturer P/N: 17113738
Static Flow lb/hr (n-Heptane): 50.0
Static Flow cc/min: 525
Dynamic Flow (mg/pulse): 1.1
Dynamic Flow Tolerance +/-%: 5%
Coil Resistance Ohms: 12
Spray Pattern: 22.4 degrees - single spray cone
Connector Type: Minitimer (Bosch EV1)
O-ring Type: Viton
Weight (non-shipping): .20 lbs