55 lb/hr Disc High-Z Injector
$220.00per 4 Pack
$330.00per 6 Pack
$440.00per 8 Pack
$550.00per 10 Pack
01D066x - 55 lb/hr Disc High-Z Fuel Injector
- High-performance aftermarket
Dynamically flowed and grouped to within 1% tolerance using Racetronix custom injector flow bench when purchased in packs.
All tests run with n-Heptane @ 20oC (+/-1oC), 3.0 Bar (+/-0.01 Bar), 14VDC (+/-0.05VDC), saturated driver with RC cutoff.
Injector flow rates are based on testing with n-Heptane test solvent (0.6855 g/ml). U.S. EPA emission test gasoline 40CFR86.113 (0.735g/ml) flows in most common injector designs at about a 3 to 4% higher rate than n-Heptane. A ratio of 1.035:1 can be used when converting the flow specifications above.
This high-impedance injector will work with all factory ECM/PCM injector drivers. ADDITIONAL INFORMATION
- The flat mating surface ensures that no excess fuel is present to evaporate and therefore, no deposits or clogging can occur
- Longer service life
- High-speed disc action
allows wider dynamic flow range for improved idling
- Revolutionary disc design resists build up deposits which can affect fuel flow
- No Fuel leakage for quicker starts
- Grease supplied to lubricate
o-rings prior to installation
INJECTORS SOLD AS EACH ARE NOT FLOW-MATCHED (LISTED FACTORY TOLERANCE APPLIES)
|MPN - Manufacturer P/N:||FJ-SM-25S|
|Static Flow lb/hr (n-Heptane):||54.9|
|Dynamic Flow (mg/pulse):||11.8|
|Coil Resistance Ohms:||12.2|