• Your shopping cart is empty.

    To put something in your Shopping Cart, you must first browse or search for an item. When an item interests you, click the button labeled "Add to Cart", the item will be shown here.

50 lb/hr Delphi High-Z Fuel Injector

Availability: NO

Item Code : 17113738

Quick Overview

...

17113738 - DISCONTINUED (SEE P/N 01D066x)

THIS ITEM HAS BEEN DISCONTINUED. PLEASE VIEW P/N 01D116x or 01D066x AS SUPERIOR REPLACEMENTS.

FLOW-MATCHED 1% INJECTORS ARE SOLD IN PACKS VIA THE 'BUY IN' DROP-DOWN MENU ABOVE.

INJECTORS SOLD AS EACH ARE NOT FLOW-MATCHED (LISTED FACTORY TOLERANCE APPLIES)

TECHNICAL INFORMATION

Dynamically flowed and grouped to within 1% tolerance using Racetronix custom injector flow bench when purchased in packs.
All tests run with n-Heptane @ 20oC (+/-1oC), 3.0 Bar (+/-0.01 Bar), 14VDC (+/-0.05VDC), saturated driver with RC cutoff.


Injector flow rates are based on testing with n-Heptane test solvent (0.6855 g/ml). U.S. EPA emission test gasoline 40CFR86.113 (0.735g/ml) flows in most common injector designs at about a 3 to 4% higher rate than n-Heptane. A ratio of 1.035:1 can be used when converting the flow specifications above.

This high-impedance injector will work with all factory ECM/PCM injector drivers.

 

TYPICAL APPLICATIONS

High-performance aftermarket

OE P/N 17104487

ADDITIONAL INFORMATION

  • Grease supplied to lubricate o-rings prior to installation
 

Retail P/N: 17113738
MPN - Manufacturer P/N: 17113738
Static Flow lb/hr (n-Heptane): 50.0
Static Flow cc/min: 525
Dynamic Flow (mg/pulse): 1.1
Dynamic Flow Tolerance +/-%: 5%
Coil Resistance Ohms: 12
Spray Pattern: 22.4 degrees - single spray cone
Connector Type: Minitimer (Bosch EV1)
O-ring Type: Viton
Weight (non-shipping): .20 lbs