Filter Sock, 11mm ID, 55x50mm, G-Media
Quick Overview
- Fuel pump filter sock, 11 mm inlet, offset
- Size 55 x 50 mm
- 31 micron graded media
- Fits 11 mm inlet pumps
- Sock chart on the page lists every size by inlet
Show More
$6.00
per EACH (USD)Fuel Pump Filter Sock, 11 mm Inlet, 55 x 50 mm, Graded Media
Fits: 11 mm inlet pumps. Media: 31 µ graded media.
The Racetronix FFS-017A is an in-tank fuel pump filter sock for pumps with a 11 mm inlet. It protects the pump from debris at the pickup. Use the chart below to compare every sock we carry by inlet size, shape and media.
Key features
- Inlet: 11 mm, Offset.
- Size: 55 x 50 mm (sock lying flat).
- Media: 31 µ graded media, suitable for the inlet of high-performance turbine and gerotor pumps.
- Fits: 11 mm inlet pumps.
- Retaining clip included.
What it fits
This sock fits Racetronix pumps with a 11 mm inlet:
RXP251E2, RXP252E2, RXP341E2, RXP342E2, RXP342TE2, RXP363E, GSS278, GSS315, GSS341, F10000302, F90000274, F90000285, F90000295
Check that the sock's size and inlet position suit your tank or pump hanger: it should sit flat on the tank floor without being folded or crushed.
Filter sock chart: all sizes
Every sock we carry, grouped by inlet size. Use the buttons to show one group, or click a column heading to sort by it (click again to reverse). On a phone, swipe the chart sideways. A blank cell means the detail is still being confirmed.
| Part | Inlet | Size | Inlet position | Media | Fits |
|---|---|---|---|---|---|
| FFS-017 | 11 mm | 56 x 59 mm | 31 µ graded media | 11 mm inlet pumps | |
| FFS-017A | 11 mm | 55 x 50 mm | Offset | 31 µ graded media | 11 mm inlet pumps |
| FFS-040 | 11 mm | 79 mm round | Centred | 31 µ graded media | 11 mm inlet pumps |
| FFS-061 | 11 mm | 92.5 x 55.5 mm | Offset | 31 µ graded media | 11 mm inlet pumps |
| FFS-220 | 11 mm | 100 x 40 mm | 31 µ graded media | 11 mm inlet pumps | |
| FFS-240G | 11 mm | 155 x 50 mm | 31 µ graded media | 11 mm inlet pumps | |
| FFS-250G | 11 mm | 78 x 85 mm | 31 µ graded media | 11 mm inlet pumps | |
| FFS-251 | 11 mm | 78 x 85 mm | 60 µ nylon mesh | Select turbine and vane pumps that allow a 60 micron mesh; check your pump maker's requirements | |
| FFS-260G | 11 mm | 200 x 60 mm | Centred | 31 µ graded media | 11 mm inlet pumps |
| WFS-02 | 11 mm | 200 x 60 mm | Centred | 31 µ graded media | 11 mm inlet pumps |
| WFS-06 | 11 mm | 200 x 60 mm | Centred | 31 µ graded media | 1998 F-body: Racetronix FPA-002A pump assembly |
| FFS-015 | 19 mm | 77 mm round | Centred | 31 µ graded media | 19 mm inlet pumps |
| FFS-111A | 19 mm | Centred | 31 µ graded media | 19 mm inlet pumps | |
| FFS-169 | 19 mm | 104 x 42 mm | 31 µ graded media | 19 mm inlet pumps | |
| WFS-05 | 19 mm | Bottom of the LT1 pump bucket (FPA-003) | |||
| WFS-549 | 19 mm | Centred | 19 mm inlet pumps | ||
| FFS-015A | 22 mm | 77 mm round | Centred | 31 µ graded media | 22 mm inlet pumps |
| FFS-021 | 22 mm | 135.8 x 55 mm | 31 µ graded media | 22 mm inlet pumps | |
| WFS-547 | 22 mm | 100 x 41 mm | Offset | 31 µ graded media | 22 mm inlet pumps |
| FFS-057 | 22.3 mm (7/8") | 144 x 37 mm | Offset | 70 µ nylon mesh | Bottom of the F99 pump bucket (FPM-001) and GM modules with a 7/8" inlet |
| FFS-C5 | Module | 30 µ | 1997 to 2002.5 C5 Corvette side-loaded fuel pump module (factory module and Racetronix FPA-055) | ||
| FFS-C56 | 11 mm | 30 µ graded media | TU475-1 modules in 2003.5 to 2013 C5 and C6 Corvettes | ||
| FFS-SM320 | Pump-specific | 60 x 110 mm | 31 µ graded media | SM320 pumps only | |
| FFS-1FLU174 | 144 x 37 mm | 31 µ | |||
| FFS-1FLU176 | 144 x 37 mm | 70 µ |
Coloured bars: red 11 mm, blue 19 mm, gold 22 mm, grey module or pump-specific. FFS-122A has been replaced by WFS-547.
Graded media or nylon mesh?
- Graded media (30-31 µ): a layered filter material that traps fine particles while keeping flow high. This is what modern high-performance turbine and gerotor pumps need at their inlet.
- Nylon mesh (60-70 µ): a coarser woven screen. The 60 µ mesh (FFS-251) suits only select pumps that allow it; the 70 µ mesh (FFS-057) is for jet-pump feeds only, never on a pump inlet.
If you are not sure, choose graded media.
Specifications
| Part number | FFS-017A |
| Inlet | 11 mm, Offset |
| Size | 55 x 50 mm |
| Media | 31 µ graded media |
| Fits | 11 mm inlet pumps |
| Notes | Retaining clip included. |
Frequently asked questions
How do I know which inlet size my pump has?
Measure the outside diameter of the pump inlet nipple: 11 mm, 19 mm or 22 mm. The sock must match that size exactly; a 19 mm sock will not seal on a 22 mm inlet. The chart above lists every sock by inlet size.
Does the shape matter?
Yes. The sock has to sit flat on the bottom of the tank or bucket without folding or being crushed, and an offset or centred inlet changes where it sits. Match the shape to your old sock or to your pump hanger.
How do I fit it?
Push the sock fully onto the pump inlet and fit the retaining clip where one is supplied. Make sure the sock lies flat and is not pinched by the hanger or the tank floor.
When should I replace it?
Whenever the pump is out of the tank, and any time the sock is stiff, discoloured or coated with varnish or debris. A clogged sock starves the pump.
Questions and support
Not sure which sock your pump needs? Email [email protected] with your pump part number before you order.
Racetronix provides technical support to verified customers through our support forum, not by phone or email. Please request forum access when you place your order so your account is approved before your parts arrive. The forum is moderated, open 24/7, and holds a knowledge base going back to 1999.
